TOA HX-7B-WP Bedienungsanleitung
TOA
Lautsprecher
HX-7B-WP
Lies die bedienungsanleitung für TOA HX-7B-WP (20 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11 Bewertungen. Hast du eine Frage zu TOA HX-7B-WP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/20

OPERATING INSTRUCTIONS
SPEAkER SySTEmS HX-7B
HX-7W
HX-7B-WP
HX-7W-WP
Thank you for purchasing TOA’s Speaker Systems.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
When using the speaker as shipped from the factory, be sure
to retighten the bolts holding the rear-mounted brackets with a
designated tightening torque. (See p. 8, "When Using the
Directivity Angle at 0º Mode.")
Failure to retighten the bolts may cause the speaker to fall, resulting
in personal injury.
WARNING

2
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS 3 .............................................................................
2. GENERAL DESCRIPTION 4 ..........................................................................
3. FEATURES 4 ............................................................................................................
4. NOTES ON OUTDOOR INSTALLATIONS
(HX-7B-WP and HX-7W-WP only) 5 ...............................................................................
5. DIMENSIONAL DIAGRAM 5 ..........................................................................
6. INPUT SECTION 6 ................................................................................................
6.1. HX-7B and HX-7W 6 .................................................................................................
6.2. HX-7B-WP and HX-7W-WP 7 ..................................................................................
7. SETTING THE SPEAKER’S DIRECTIVITY ANGLE MODE 7 ...
7.1. When Using the Directivity Angle at 0° Modes 8 ......................................................
7.2. Changing the Directivity Angle to Between 15° and 45° Modes 8 ...........................
7.3. Changing the Directivity Angle to 60° Mode 9 .........................................................
8. USING THE SUPPLIED SUSPENSION BRACKETS
(HX-7B and HX-7W only) ............................................................................................. 9
9. OPTIONAL MOUNTING BRACKETS ................................................ 12
9.1. Types of Mounting Brackets ................................................................................ 12
9.2. Installation Examples .......................................................................................... 13
10. SAFETY WIRE INSTALLATION .......................................................... 14
11. EQUALIZATION USING
A DIGITAL SIGNAL PROCESSOR ................................................... 15
12. COMBINATION WITH
THE MATCHING TRANSFORMER ................................................... 17
13. SPECIFICATIONS ........................................................................................ 17

3
1. SAFETY PRECAUTIONS
• Beforeinstallationoruse,besuretocarefullyreadalltheinstructionsinthissectionforcorrect andsafe
operation.
• Besuretofollowalltheprecautionaryinstructionsinthissection,whichcontainimportantwarningsand/or
cautions regarding safety.
• Afterreading,keepthismanualhandyforfuturereference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual rst and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
resultinmoderateorminorpersonalinjury,and/orpropertydamage.
WARNING
CAUTION
When Installing the Unit
• Avoidinstallingormountingthespeakerinunstable
locations, such as on a rickety table or a slanted
surface.
Doing so may result in the speaker falling down and
causingpersonalinjuryand/orpropertydamage.
• Referallinstallationworktothedealerfromwhom
the speaker was purchased. Installation for ying
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• FlyingPrecautions
Be sure to follow the instructions below. Otherwise,
the suspension wires or belts may be off or snap
and the speaker may fall off, causing personal
injury.
· Check toconrmthatthe suspensionwiresand
belts are strong enough to withstand the speaker
load.
· The connectors of the suspension wires and belts
must be securely linked with those of the speaker.
· All parts and components (such as enclosures,
metal pieces, and screws) must be free from any
deformation, crack, and corrosion.
· Be sure to use screws supplied with the optional
yinghardwarewheninstallingthespeakerusing
such hardware.
• Install the speaker only in a location that can
structurally support the weight of the speaker and
the mounting bracket. Doing otherwise may result
in the speaker falling down and causing personal
injuryand/orpropertydamage.
• (HX-7B-WPandHX-7W-WPonly)
When installing the speaker under the eaves in the
snowy area, take appropriate measures to prevent
snow from lying on the speaker. If snow lies on the
speaker, it may fall, causing personal injuries.
• Owing to the speaker’s size and weight, be sure
that at least two persons are available to install the
speaker. Failure to do so could result in personal
injury.
• (HX-7BandHX-7Wonly)
Since the speaker is designed for indoor use, do
not install it outdoors.
If installed outdoors, the aging of parts causes
the speaker to fall off, resulting in personal injury.
Also, when it gets wet with rain, there is a danger of
electric shock.
• Donotuseothermethodsthanspeciedtomount
the speaker. Extreme force is applied to the speaker
and it could fall off, possibly resulting in personal
injuries.
• Attachthesafetywiretothespeaker.Ifnotattached,
the speaker could fall off, resulting in personal
injury.
• Use nuts and bolts that are appropriate for the
ceiling’s or wall’s structure and composition. Failure
to do so may cause the speaker to fall, resulting in
material damage and possible personal injury.
• Tighten each nut and bolt securely. Ensure that
the bracket has no loose joints after installation
to prevent accidents that could result in personal
injury.
• Usethespeciedmountingbracketandmatching
transformer in combination.
Doing otherwise may cause the speaker or
WARNING
Produktspezifikationen
Marke: | TOA |
Kategorie: | Lautsprecher |
Modell: | HX-7B-WP |
Breite: | 497 mm |
Tiefe: | 274 mm |
Gewicht: | 30000 g |
Produktfarbe: | Schwarz |
Übertragungstechnik: | Kabelgebunden |
Impedanz: | 8 Ohm |
Höhe: | 664 mm |
RMS-Leistung: | 750 W |
Gehäusematerial: | Polypropylene (PP), Steel |
Audio Kanäle: | - Kanäle |
Anzahl des Antriebs: | 12 |
Frequenzbereich: | 105 - 20000 Hz |
Woofer: | Ja |
Tieftönerdurchmesser (imperial): | 5.5 Zoll |
Anzahl der Tieftöner-Antriebe: | 8 |
Empfindlichkeit: | 100 dB |
Lautsprechertyp: | 2-Wege |
Tieftönerdurchmesser: | 130 mm |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TOA HX-7B-WP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher TOA
8 Oktober 2024
3 Oktober 2024
27 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
20 September 2024
19 September 2024
19 September 2024
Bedienungsanleitung Lautsprecher
- Grundig
- Microlab
- Nokia
- Cerwin-Vega
- JBL
- Martin Logan
- Handy Century
- Genelec
- DLS
- LogiLink
- Pure
- Punos
- OSD Audio
- MarQuant
- Oregon Scientific
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025