TOA HY-CM20W Bedienungsanleitung

Lies die bedienungsanleitung für TOA HY-CM20W (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu TOA HY-CM20W oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

133-01-00122-00

15°

(30°)

45°

45°

[HY-CM20B, HY-CM20W]

Adjustable within this angle range.

The figure above is an example

of F-1000 series installation.

[HY-CM10B, HY-CM10W]

Unit: mm

9.8 x 41.8 oval hole

[HY-CM20B, HY-CM20W][HY-CM10B, HY-CM10W]

175

72.5

6.3

6.3

ø40ø9.8

84

40°

20°

30°

15°

ø120

108

45

ø70

48

Tip:The wall bracket supplied with each speaker is not used.

Step 1.h the r ct to the r of the sr Attacspeakebrakereapeake

cabinet. Use the screws supplied with the speaker.

(HY-CM10B/W: 2 pieces; HY-CM20B/W: 4 pieces)

Note: Mount the bracket so that the speaker is suspended

in a horizontal orientation.

Step 2.Ach a t ket to e cg t et g ttajoinbractheilinmounbrackusin

the supplied 4 screws.

Step 3.h the cg t t to the g usg the Attaceilinmounbrackeceilinin

ceiling mounting holes.

Note

Hardware used for mounting the ceiling mount bracket to

the ceiling is not supplied.

Step 4.Mount the speaker to the joint bracket.

It the r t to the t ct d nserspeakebrackeinjoinbrakean

looelsecurixinbolemporarspeakesy e the fg t for ty r

installation.

Step 5.Connect the speaker cable to the speaker input terminal.

For connections, refer to the instruction manual enclosed

with the speaker.

5.2. HY-CM20B and HY-CM20W

INSTALLATION MANUAL

CEILING MOUNT BRACKETS

HY-CM10B

HY-CM10W

HY-CM20B

HY-CM20W

3. MOUNTING DIMENSIONS

Step 6.At the sk's vtl tg e d tten djuspeaerericamouninanglanigh

the fixing bolt.

The speaker angle can be adjusted in 7.5º steps within the

range as follows.

• When the HY-10B/W is used

F-1000 series: 0º(horizontal) to 45º downward

F-1300 series: 7.5º to 45º downward

• When the HY

-20B/W is used

F-2000 series: 15º to 45º downward

•re n or , be re to ry rd l e Befoinstallatiousesucaefulleaalth

instructions in this section for correct and safe operation.

•Be sure to follow all the precautionary instructions in this section,

whiconaiimporanwarningandauionregardinch tn tt s /or cts g

safety.

•After reading, keep this manual handy for future reference.

1. SAFETY PRECAUTIONS

Indiatepotentiallhazadousituatiowhichcs a y rs n , if

mishandled, could result in death or serious personal injury.

WARNING

•Install the unit only in a location that can structurally support the

weight of the unit and the speaker. Doing otherwise may result in

the sker fg n d g l iy /or peaallindowancausinpersonanjurand

property damage.

•Sce the t is sd for r use, do t l it inunideigneindoonoinalst

outdooinstalleoutdoothaginpacausethrs. If d rs, e g of rts s e

speaker to fall off, resulting in personal injury.

•Do t e otr s n d to t the . noushemethodthaspecifiemoununit

Extreme force is applied to the unit and the speaker could fall off,

possibly resulting in personal injuries.

•Use nuts and bolts that are appropriate for the ceiling's structure

and composition. Failure to do so may cause the speaker to fall,

resulting in material damage and possible personal injury.

•Tighten each nut and bolt securely. Ensure that the unit has no

loe jots ar itlaon to ent is at ld osinftensaltiprevaccdentthcou

result in personal injury.

•Use the specified speaker

in combination. Doing otherwise may

cause the speaker to fall off, resulting in personal injury.

•Do not mount the unit in locations exposed to constant vibration.

Thunicadamagecesiibrationpotentialle t n be d by exsve v, y

causing the speaker to fall, which could result in personal injury.

•Do not use anti-rust lubricant. If it contacts resin or rubber parts,

ty d tte d se the t to f, sy hecouldeerioraancauuniallposibl

resulting in personal injury.

Indiatepotentiallhazadousituatiowhichcs a y rs n , if

mihandledcoulreulmoderaminopersonas, d st in te or r l

injury, and/or property damage.

CAUTION

•Avoid touching the unit's sharp metal edge to prevent injury.

•Do not hang down from the unit as this may cause it to fall down

or drop, resulting in personal injury and/or property damage.

•Have the unit checked periodically by the shop from where it was

purchased. Failure to do so may result in corrosion or damage to

the t tt d e the t to f, y g unihacoulcausuniallpossiblcausin

personal injury.

The HY-CM10B and HY-CM10W Ceiling Mount Brackets are used

to mount F-1000/1300 Series speakers to a ceiling in a horizontal

configuration.

T HYhe-CM20andB HY-CM20CeilingMounrackeareusedW t Bts

to moun-2000eriepeaerint F Ss sks a ztfhorional coniguraiont.

Note

To t the sker to the cg in a tical t, e mounpeaeilinverorientaionus

the brackets supplied with the speaker. For more information, refer

to the instruction manual enclosed with the speaker.

2. GENERAL DESCRIPTION

4. FINISHED ASSEMBLING DIAGRAM

5. SPECIFICATIONS

5.1. HY-CM10B and HY-CM10W

Note

The design and specifications are subject to change without notice

for improvement.

6. INSTALLATION

URL: http://www.toa.jp/

Speaker bracket

Joint bracket

45°

30°

30°

15°

Refer to the figures below for the positional relationship

between the speaker bracket's "groove" and the joint

bracket's "indentation."

Note

The mating surfaces of the speaker bracket and joint

bracket are designed to interlock.

Ensure that both parts are securely engaged with each

other after mounting is complete.

30°

7.5°

0°

(horizontal)

[0° (horizontal) position][7.5° downward position]

[15° downward position][45° downward position]

Mounting to the ceiling

HY-CM10B/W

HY-CM20B/W

• HY-CM20B, HY-CM20W

• HY-CM10B, HY-CM10W

Speaker bracket

(supplied with the speaker)

Speaker system

F-2000 series

Speaker bracket

(supplied with the speaker)

Screw M5 x 20

(supplied with the speaker)

Screw M5 x 20

(supplied with the speaker)

Joint bracket

(supplied with the speaker)

Accessory screw M5 x 10

2

4, 6

4, 6

Fixing bolt

(supplied with the speaker)

Fixing bolt

(supplied with the speaker)

Joint bracket

(supplied with the speaker)

Accessory screw M5 x 10

23

Mounting to the ceiling

3

1

1

Speaker system

F-1000 series

The figure above shows the

screw mounting positions

for the F-1300 series.

Ceiling mounting holes

(3 places)

[HY-CM20B, HY-CM20W][HY-CM10B, HY-CM10W]

Ceiling mounting holes

(2 places)

Models No.

HY-CM10B

HY-CM10W

Applicable Speaker

F-1000B, F-1000BT,

F-1300B, F-1300BT

F-1000W, F-1000WT,

F-1300W, F-1300WT

Finish

Steel plate, bck,la

paint

Steel plate, ite,wh

paint

Dimensions

48 (w) x 100 (h) x 108 (d) mm

Weight

210 g

Accessories

Machine screw M5 x 10 with washers …4

Models No.

HY-CM20B

HY-CM20W

Applicable Speaker

F-20B, F-20BT,F-20W,F-20WT,00000000

Finish

Steel plate, bck,la

paint

Steel plate, ite,wh

paint

Dimensions

84 (w) x 135 (h) x 175 (d) mm

Weight

610 g

Accessories

Machine rew M5 x 10 with washers …4sc

Produktspezifikationen