TOA SS-9001PS Bedienungsanleitung

Lies die bedienungsanleitung für TOA SS-9001PS (2 Seiten) kostenlos online; sie gehört zur Kategorie Regeln. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu TOA SS-9001PS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SPEAKER SELECTOR

OPERATING INSTRUCTIONS

SS-9001

Thank you for purchasing TOA's Speaker Selector.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

1. SAFETY PRECAUTIONS

•Before installation or use, be sure to carefully read all the instructions in this section for correct

and safe operation.

•Be sure to follow all the precautionary instructions in this section, which contain important

warnings and/or cautions regarding safety.

•After reading, keep this manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled,

could result in death or serious personal injury.

WARNING

•External wiring connected to the terminals marked withrequires installation by an instructed

person.

2. GENERAL DESCRIPTION

The SS-9001 is a speaker selector used with 9000 series amplifier.

It selectively distributes each of 2 inputs to the same 4 output zones.

3. SPECIFICATIONS

Supplied from the optional AD-246 AC adapter or

an external 24 V DC/200 mA power supply.

120 mA

No-voltage make contact input (polarized), open voltage: 24 V DC,

short-circuit current: 3 mA

Under 240 W (70 V/100 V line)

Removable terminal block (2 pins)

Removable terminal block (10 pins)

–10 to +40°C

Case: Surface-treated steel plate

112 (w) x 197 (h) x 30 (d) mm

530 g

Removable terminal plug (2 pins) x 6, Removable terminal plug (10 pins) x 1,

Cord clamp x 1, Tapping screw (4 x 20) x 4

Power Source

Current Consumption

Control Signal

Control Power

Speaker Terminal

Control Terminal

Operating Temperature

Finish

Dimensions

Weight

Accessories

Note: The design and specifications are subject to change without notice for improvement.

4. NOMENCLATURE AND FUNCTIONS

9000 SERIES

SPEAKER SELECTOR

ZONE 1IN 1

70V/100V MAX. 240W

70V/100V MAX. 240W

IN

2

ZONE 2

ZONE 2

ZONE 1

G

G

G

G

ZONE 4

ZONE 3

ZONE 3

CTRL IN

DC IN

24V

120mA

IN

2

IN

2

ZONE 4

IN

2

IN

2

1

2

3

4

5

1

30

18 1870

112

157

197

17710

[Left side][Front][Right side]

1.Speaker input terminals [IN 1, IN 2]

2-pin removable terminal blocks.

Connect the speaker output (high impedance

line, up to 240 W) from the power amplifier to

each terminal.

Short the IN 2 terminal's pins when only the

IN 1 terminal is used.

2.Control input terminal [CTRL IN]

8 pins in the 10-pin removable terminal block.

Receives the control signals (polarized non-

voltage contacts) from the ZP-001T when the

9000 series amplifier is in the Matrix "Sub-

Mode" (single output or BGM/PAGE), and

activates the inner relays.

This terminal can also receive control signals

from the control output terminals of the 9000

series amplifier or C-001T Control I/O

Expansion Module. (For details, refer to the

9000 series amplifier's instruction manual.)

3.DC power input terminals [DC IN]

Requires the power input of 24 V DC.

DC input terminal or 2 pins in the 10-pin

removable terminal block.

Connect the power source that can supply

200 mA or more to this terminal.

The optional AD-246 AC Adapter can be

used for the power supply.

4.Cord clamp

Fixes the AC adapter's power cord.

5.Speaker output terminals [ZONE 1/2/3/4]

2-pin removable terminal blocks.

Connect speakers to each terminal, which is

capable of delivering 240 W output on a line.

Unit: mm

Produktspezifikationen