TP-Link Kasa KE100 Bedienungsanleitung
TP-Link
Thermostat
Kasa KE100
Lies die bedienungsanleitung für TP-Link Kasa KE100 (3 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 61 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 31 Bewertungen. Hast du eine Frage zu TP-Link Kasa KE100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
Smart Thermostatic Radiator Valve
Quick Start Guide
Install Guide:
Scan QR code or visit
https://www.tp-link.com/support/faq/3404/
1. Set up a Kasa smart hub in the Kasa Smart app if you
haven’t already done so. You can get the app Kasa Smart
from the App Store or Google Play.
If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst. You can adjust temperature manually.
After inserting the batteries, the valve is ready to use.
Rotate the valve to increase / decrease temperature.
OR
2. Use the provided cover-opener to press and hold the
SYNC/RESET button for 5 seconds to reset the valve.
3. Smart Open the Kasa Smart app, tap + and select
Thermostats. Follow the app instructions to pair the valve
and complete setup.
There are two types of valves: and .Thermostatic Manual
Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.
If your connector is , you can screw the new valve onto the radiator directly. M30 x 1.5
If not, check whether one of the provided adapters ts the connector. If your none of them t your
connector, please purchase a proper one yourself.
Thermostatic Valve Manual Valve
1. 2. Check existing valve type Check the connector type
01 / Check Compatibility
03 / Install the Valve
04 / Set Up the Valve After Install Don’t Have a Hub?
1. Install the valve rst before powering it up.
2. No need to shut o water before changing the radiator
valve. Water will not leak.
3. Avoid installing the valve in the same room where you
have installed the boiler thermostat.
4. Install the valve within range of your Kasa smart hub if you
wish to control it using the Kasa Smart app.
02 / Install Requirements
1. Unscrew the existing valve. Read the following instructions rst before installing
the new valve:
2. Screw the new valve directly (for M30 x 1.5 connector) or after installing
the proper adapter (for non-M30 x 1.5 connectors). The ▲ at the bottom
of the valve indicates the position of the display.
4. Open the battery cover and insert two AA LR6 Alkaline
batteries. Make sure the positive and negative
terminals face the correct direction.
3. Remove the cover of the valve by rotating
counterclockwise using the provided cover-opener.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
M30 x 1.5
RAVL Adapter
RAV Adapter
RA Adapter
30mm
1.5mm
Vertical InstallationHorizontal Installation
SYNC/RESET
*Images may dier from your actual product.
Produktspezifikationen
| Marke: | TP-Link |
| Kategorie: | Thermostat |
| Modell: | Kasa KE100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit TP-Link Kasa KE100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat TP-Link
26 August 2024
21 Juli 2024
17 Februar 2024
Bedienungsanleitung Thermostat
- Joblotron
- AcuRite
- Theben
- Cepra
- Salus
- Rose LM
- Perel
- EnerGenie
- Pro1
- Hama
- Homematic IP
- Otio
- Salcar
- Oregon Scientific
- EMOS
Neueste Bedienungsanleitung für -Kategorien-
19 Januar 2026
14 Januar 2026
14 Januar 2026
13 Januar 2026
2 Januar 2026
29 Dezember 2026
27 Dezember 2025
25 Dezember 2025
23 Dezember 2025
23 Dezember 2025