TP-Link Omada Pro S4500-16GP Bedienungsanleitung

Lies die bedienungsanleitung für TP-Link Omada Pro S4500-16GP (2 Seiten) kostenlos online; sie gehört zur Kategorie Schalten. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu TP-Link Omada Pro S4500-16GP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

© 2023 TP-Link 7106510430 REV1.0.0

Omada Pro Gigabit Smart Switch

1. To access the management page of the switch, open a browser and type

the switch’s IP address in the address eld, then press the Enter key.

If the switch obtains IP address from the DHCP server (typically a router), nd

the switch’s IP address on the DHCP server.

If not, use the default IP address to launch the switch’s 192.168.0.1

management page.

Note: Make sure the switch and computer are in the same subnet.

2. admin Enter for both the username and password in the lower case letters

to log in. The rst time you log in, change the password to better protect

your network and devices.

3. After a successful login, the main page will appear. You can click the menus

on the top side and left side to congure the corresponding functions.

Installation Guide

Conguration

LED Explanation

For the detailed congurations, refer to the User Guide and CLI Guide. The

guides can be found on the download center of our ocial website:

https://www.tp-link.com/support/download/.

Method 1: Standalone Mode

Switch PC

In Standalone Mode, use a computer to congure and manage the switch.

The switch supports two conguration methods:

Standalone Mode: Congure and manage the switch singly.

Controller Mode: Congure and manage the network devices centrally. It is recommended in the large-scale network, which consists of mass devices such as

access points, switches, and gateways.

Note: When the switch is changed from Standalone Mode to Controller Mode, congurations of the switch will be lost. For details, refer to the related documents on the download center of our

ocial website: https://www.tp-link.com/support/download/.

Note:

1. PoE ports can also connect to non-PoE devices, but only transmit data.

2. Maximum PoE power is 30 W for each PoE port, and 62 W (for S4500-8GP)/61 W (for S4500-8GP2F) for all PoE ports.

3. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as

a result of client limitations and environmental factors.

For simplicity, we will take S4500-8GP2F for example throughout the Guide.

Note:

1. Port 8 is a PD (Powered Device) port that supports being powered by a PSE (Power Sourcing Equipment) which

complies with LPS or PS2 standard and 802.3af/at standard.

2. The DC power input takes precedence over the PD port. If the DC input fails, the PoE input on the PD port will

supply power instead.

Ethernet Ports (1–8)

AC Power Cord

DC Power Adapter

Internet

PC

PSE

LED SExplanationtatus

P erow

OnPower on

S temys

FF Systlashinglashing: em running normally

Link/Act

(port 1–8)

On (Green)Running at 1000 Mbps

On (Yellw)Running at 10/100 Mbpso

FTransmitting/receiving datalashing

No connected device

SPF1/SFP2

(For S4500-

8GP2F)

On (Green)Running at 1000 Mbps

On (Yellw)Running at 100 Mbpso

FTransmitting/receiving datalashing

No connected device

PoE Status

(For Port 1-4 of

S4500-8GP/Port

1-8 of S4500-

8GP2F)

OnProviding PoE power

Flashing

Current-ovrt-cirt/Connected erload/Sho cui

to a non-standard PD/Power exceeded the

Not providing PoE Power

PoE MAX

(For S4500-8GP/

S4500-8GP2F)

OnRemaining power supply ≤ 7W

Flashing Remaining powkfor er supply eeps ≤ 7 W

mor tese than 2 minu

Remaining power supply

>7W

Connection for PoE Switch

Ethernet Ports (1–8)

PC IP CameraAPIP Phone

PoE Devices

DC Power Adapter

AC Power Cord

Internet

SFP Slots

Connection for Non-PoE Switch

For simplicity, we will take S4500-8G for example throughout the Guide.

Produktspezifikationen