TP-Link TC40GW Bedienungsanleitung

Lies die bedienungsanleitung für TP-Link TC40GW (2 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu TP-Link TC40GW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Outdoor Pan/Tilt 4G LTE Camera

4. Set Up

Quick Start Guide

*Images may dier from actual products.7106511291 REV1.0.0

1. Download App

Download the app from the Tapo

App Store or Google Play, and log in.

01/ Set Up Your Camera

OR

Option 1: Wall MountOption 2: Overhang MountOption 3: Pole Mount

02/ Mount Your Camera

Tap the button > Add Device in

the app and select your model. Follow

the app instructions to set up your

camera.

The camera is when set on a table or shelf. Mount the camera via when installing outdoors. not waterproofOption 1-3

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

1. Ax the Camera and Bracket

Route the camera power cord

and Ethernet cable through the

opening of the bracket. Use two

bracket screws to ax the

bracket and camera.

1. Ax the Camera and Bracket1. Ax the Camera and Bracket

Stick the mounting template to the

desired mounting place. Drill four

screw holes according to the

template.

2. Drill Holes

Stick the mounting template to the

desired mounting place. Drill four

screw holes according to the

template.

2. Drill Holes

3. Mount the Camera

Φ=6 mm (15/64 in.)Φ=6 mm (15/64 in.)

Insert four mounting anchors into

the holes, then use the mounting

screws to ax the camera and

bracket over the anchors.

3. Mount the Camera

Insert four mounting anchors into

the holes, then use the mounting

screws to ax the camera and

bracket over the anchors.

Mount the camera on the pole

using two pole-mounting loops*

(loop width ≤ 12 mm).

2. Mount the Camera

Flip the page over to continue.

*Pole-mounting loops are not

included.

3. Power Up

Plug in the power adapter or connect

to a PoE router via an Ethernet cable

to power up your camera.

OR

My Home

Insert a 4G Nano SIM card* into the

card slot. If you use an Ethernet

connection, skip this step.

2. Insert SIM Card

*Supported Frequency Bands:

LTE-FDD: B 1/3/5/7/8/20/28

LTE-TDD: B 38/40/41

Troubleshooting Guide:

Scan the QR code or visit

https://www.tp-link.com/support/faq/4046/

4. Install the Antenna

1) Rotate the antenna

clockwise to attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna vertically

for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

1) Rotate the antenna

clockwise to attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna vertically

for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof

performance.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof performance.

Note: For the cable connection,

ensure the antenna is properly

installed for waterproof

performance.

4. Install the Antenna

1) Rotate the antenna clockwise to

attach it.

2) Rotate the SMA connector

clockwise to tighten the

antenna.

3) Adjust the antenna to either an

acute angle or horizontal with

the ceiling for the best 4G signal.

4) Re-tighten the connector in

case the antenna is loose.

3. Install the Antenna

SMA Connector

1

2

1

2

SMA Connector

Pole-mounting loops

SMA Connector

1

2

Produktspezifikationen