TP-Link TL-SG1006PP Bedienungsanleitung

TP-Link Schalter TL-SG1006PP

Lies die bedienungsanleitung für TP-Link TL-SG1006PP (3 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 18 Bewertungen. Hast du eine Frage zu TP-Link TL-SG1006PP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/3

- With 3 PoE+ and 1 PoE++ ports, transfers data and power on one single cable

- Working with IEEE 802.3af/at/bt compliant PDs, expands your network

- Supports PoE power up to 60 W for PoE++ port and 30 W for each PoE+ port

- Supports PoE power up to 64 W* for all PoE ports

- Up to 250 m data and power transmission under Extend Mode** specially designed for surveillance

system

- With PoE Auto Recovery, the switch will automatically reboot your dropped or unresponsive

PoE-powered devices connected to port 1–4

- Requires no conguration and installation

- Fanless Design

- Supports desktop and wall mountable installation methods

Highlights

6-Port Gigabit Desktop Switch

with 3-Port PoE+ and 1-Port PoE++

Overview

TL-SG1006PP is an unmanaged switch with 6 Gigabit ports that requires no conguration and provides

4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE

802.3af/at/bt compliant Powered Devices (PDs) at port 1 and IEEE 802.3af/at compliant Powered

Devices (PDs) at port 2-4. In this situation, the electrical power is transmitted along with data in one

single cable allowing you to expand your network to where there are no power lines or outlets, where

you wish to x devices such as APs, IP Cameras or IP Phones, etc.

Power Over Ethernet

4 RJ45 ports (port 1 to port 4) of the switch support Power over Ethernet (PoE) function. They can

automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs)

at port 1 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 2-4.

Overload Arrangement

TL-SG1006PP has the priority function which will help protect the system when the system power is

overloaded. If all PoE PDs power consumption is ≥ 64 W*, a priority will be arranged among the PoE

ports, then the system will cut o the power of the lowest-priority port.

Intelligent Power Management

Priority (port 1 > port 2 > port 3 > port 4): This function will help protect the system when the system

power is overloaded. For example, port 2, 3, and 4 is using 18 W respectively (maximum power per port

is 30 W); the system power is 54 W in total. If there is an additional PD inserted to port 1 with 25 W, and

then the system will cut o the power of port 4 because of the overloaded power, this means port 2

and 3 will use 18 W respectively and port 1 will use 25 W, no power will be supplied to port 4.

Highlight Performance

• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-2.

• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered

devices (PD) for port 1-4. When the switch nds that a PD stops sending data packets to the switch

for a long period, the switch will reboot it automatically.

TL-SG1006PP is easy to install and use. It requires no conguration and installation. With desktop and

wall mountable design, outstanding performance and quality, the TP-Link 6-Port Gigabit Desktop

Switch with 3-Port PoE+ and 1-Port PoE++ TL-SG1006PP is a great selection for expanding your

network.

Easy to Use

Hardware Features & Performance

Specications

www.tp-link.com

Product Picture

Model TL-SG1006PP

Standards IE 2.3 u, 2. 02. IE IEEE 80 i, I .3EEE 802 I E 80EE 3x, IEEE 8 3af, EE 802 3a . t, EE

802.3bt

Network Ports 6 10/100/1000 Mbps RJ45 Ports;

Network Media ( e)Cabl

10 SE-T: UTP category 3, 4, 5 cable (maximum 100 m); BA

EIA/TIA-568 100Ω STP (maximum 100 m)

100BASE-TX: UTP category 5, 5e cable (maximum 100 m);

EIA/TIA-568 100Ω STP (maximum 100 m)

1000 SE-T: UTP category 5e cable or above (maximum 100 m); BA

EIA/TIA-568 100Ω STP (maximum 100 m)

PoE

PoE Standard: IEEE 802.3af/at/bt for port 1, IEEE 802.3af/at for port 2-4

PoE Port 1: up to 60 W

PoE Port 2–4: up to 30 W per port

PoE Power Budget: 64 W*

Auto-Negotiation YES

Auto MDI/MDIX YES

PoE P er on RJ45ow

Port 1:

Power+: pin 3 & pin 6

Power -: pin 1 & pin 2

Power+: pin 4 & pin 5

Power -: pin 7 & pin 8

Port 2-4:

Power+: pin 3 & pin 6

Power -: pin 1 & pin 2

Max Power onsumptionC4.75 W (220 V/50 Hz no PD connected)

71.46 W (220 V/50 Hz with 64 W* PD connected)

Max Heat Dissipation 16.20 BTU/h (220 V/50 Hz no PD connected)

243.68 BTU/h (220 V/50 Hz with 64 W* PD connected)

Forwarding Mode Store and Forward

Swit ty 12 Gbpsch Capaci

MAC Address Table 4K, Auto-learning, Auto-aging

Extend Mode YES (for Ports 1–2)

PoE Auto Rec ery YES (for Ports 1-4)ov

Flow onrol YESC

Fanless YES

LED Power, Link/Act, PoE Status, PoE MAX

Dimensions 6.2x4.0x1.0 in (158x101x25 mm)

C CCE, F

Environment

Operating Temperature t to 104°F): 0°C o 40°C (32°F

Storage Temperature t to 158°F): -40°C o 70°C (-40°F

Operating Humidity: 10% to 90% RH, non-condensing

Storage Humidity: 5% to 90% RH, non-condensing

Note:

* PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will

vary as a result of client limitations and environmental factors.

**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission

distance may vary from the quality of the cables.

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Schalter
Modell:	TL-SG1006PP
Breite:	158 mm
Tiefe:	101 mm
Produktfarbe:	Grau
Höhe:	25 mm
Energiequelle:	DC/PoE
DC input Spannung:	53.5 V
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.1p, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Quality of Service (QoS) Support:	Ja
Schnellstartübersicht:	Ja
Zertifizierung:	FCC, CE, RoHS
Stromverbrauch (Standardbetrieb):	4.75 W
Power over Ethernet (PoE):	Ja
Stromverbrauch (max.):	71.46 W
Verpackungsart:	Box
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	6
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Auto MDI/MDI-X:	Ja
10G-Unterstützung:	Nein
Kupfer Ethernet Verkabelungstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
MAC-Adressentabelle:	4000 Eintragungen
Routing-/Switching-Kapazität:	12 Gbit/s
Rack-Einbau:	Ja
Eingangsstrom:	1.31 A
Store-and-Forward:	Ja
Stapelbar:	Ja
Auto-Negotiation-Funktion:	Ja
unterstütze Kabeltypen:	Cat3, Cat4, Cat5, Cat5e, Cat6
Unterstützung Datenflusssteuerung:	Ja
Netzteil enthalten:	Ja
Transferrate:	8.928 Mpps
Wärmeableitung:	16.2 BTU/h
Gesamtleistung Power over Ethernet (PoE):	64 W
Ventilatorlos:	Ja
Anzahl Power over Ethernet (PoE) Anschlüsse:	4
Selbstlernen von MAC-Adressen unterstützt:	Ja
Auto-Alterung von MAC-Adressen unterstützt:	Ja
IGMP-Snooping:	Ja