TP-Link TL-SL1226P Bedienungsanleitung

TP-Link Schalter TL-SL1226P

Lies die bedienungsanleitung für TP-Link TL-SL1226P (16 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 44 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 22.5 Bewertungen. Hast du eine Frage zu TP-Link TL-SL1226P oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/16

Authentication

JetStream Switches

1910012790 REV1.0.0

For Class A switch with power adapter:

FCC Compliance Information Statement

Product Name: JetStream Switch

Model Number: T1500G‑8T / TL‑SF1005LP / TL‑SF1005P / TL‑SF1008LP / TL‑SF1008P /

TL‑SF1009P / TL‑SG1005LP / TL‑SG1005P / TL‑SG1008P / TL‑SG116 / TL‑SG116E / TL‑SG1210P /

TL‑SG2008P / TL‑SG2210P

Component Name Model

Power Adapter

T120100‑2B1 (For T1500G‑8T / TL‑SG116E / TL‑SG116)

T535081‑2‑DT (For TL‑SG1005LP / TL‑SF1005LP / TL‑SF1008LP)

T535131‑2‑DT (For TL‑SG2210P / TL‑SG1005P / TL‑SG1008P /

TL‑SG1210P / TL‑SF1005P / TL‑SF1008P / TL‑SF1009P)

T535135‑2‑DT (For TL‑SG2008P)

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Product Name: Power Adapter

Model Number: T120100‑2B1 / T535081‑2‑DT / T535131‑2‑DT / T535135‑2‑DT

Responsible party:

TP‑Link USA Corporation, d/b/a TP‑Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: https://www.tp‑link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E‑mail: sales.usa@tp‑link.com

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

We, TP‑Link USA Corporation, has determined that the equipment shown as above has been

shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized

change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2020/04/14

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Schalter
Modell:	TL-SL1226P
Breite:	440 mm
Tiefe:	180 mm
Produktfarbe:	Grau
Höhe:	44 mm
Energiequelle:	AC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	250 mm
Verpackungstiefe:	528 mm
Verpackungshöhe:	80 mm
Paketgewicht:	3020 g
Netzstandard:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3x
Schnellstartübersicht:	Ja
Zertifizierung:	CE, FCC, RoHS
Power over Ethernet (PoE):	Ja
Warentarifnummer (HS):	85176990
Stromverbrauch (max.):	281 W
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	26
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Auto MDI/MDI-X:	Ja
10G-Unterstützung:	Nein
Kupfer Ethernet Verkabelungstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
MAC-Adressentabelle:	8000 Eintragungen
Routing-/Switching-Kapazität:	8.8 Gbit/s
Jumbo Frames Unterstützung:	Ja
Rack-Einbau:	Ja
Formfaktor:	1U
Anzahl Combo-SPF-Anschlüsse:	2
Anzahl Gigabit Ethernet (Kupfer) Anschlüsse:	2
Store-and-Forward:	Ja
Auto-Negotiation-Funktion:	Ja
Netzteil enthalten:	Ja
Transferrate:	6.54 Mpps
Jumbo-Frames:	10000
Datenpaket-Pufferspeicher:	4.1 MB
Wärmeableitung:	1002.54 BTU/h
Anzahl Power over Ethernet plus (PoE+) Anschlüsse:	24
Gesamtleistung Power over Ethernet (PoE):	250 W
Rackmontageset:	Ja
Anzahl Lüfter:	2 Lüfter
Power over Ethernet (PoE) Leistung pro Anschluss:	30 W
Traffic-Klassifizierung:	Ja
Fast Ethernet (Kupfer)-Anschlüsse:	24