Uline H-11632 Bedienungsanleitung

Lies die bedienungsanleitung für Uline H-11632 (24 Seiten) kostenlos online; sie gehört zur Kategorie Ventilator. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 6 Bewertungen. Hast du eine Frage zu Uline H-11632 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

PAGE 1 OF 24 1025 IH-11632

H-11632

JUMBO MOBILE FAN

1-800-295-5510

uline.com

π

TECHNICAL DATA

Size72"

Voltage120V

Frequency60Hz

Amps6A

Wattage450W

Maximum Speed300 RPM

Net Weight397 lbs.

Gross Weight584 lbs.

SAFETY

CAUTION! Read and save these instructions.

Read carefully before attempting to assemble,

install, operate or maintain this product. Do

not use the fan if any part is damaged or

missing. Automatic reset safety device in

motor. To reduce risk of injury, disconnect

power supply before servicing. Protect yourself

and others by observing all safety information.

Failure to comply with instructions could result

in personal injury and/or property damage.

Retain instructions for future reference.

WARNING! To reduce the risk of fire or electric

shock, do not use this fan with any solid-state

speed control device. This fan has a grounded

plug. To reduce the risk of fire or electric shock,

this plug is intended to fit in an outlet only

one way. If the plug does not fit into the outlet,

contact a qualified electrician. Do not attempt

to bypass this safety feature. To reduce the risk

of fire, electric shock or injury to persons, do

not use replacement parts that have not been

recommended by the manufacturer.

NOTE: To comply with UL507, fan should not be

used in unattended areas.

• Ensure that the power source conforms to the

electrical requirements of the fan.

• Where a two-prong wall receptacle is encountered,

it must be replaced with a properly grounded

three-prong receptacle installed in accordance

with the United States National Electrical Code

(NEC) and all applicable local codes and

ordinances. This work must be done by a qualified

electrician, using copper wire only.

• Where possible, avoid the use of extension cords. If

they must be used, minimize the risk of overheating

by ensuring that they are UL Listed and of the

proper gauge and length. Never use a single

extension cord to operate more than one fan.

• Do not kink the cord or allow it to contact oil,

grease, chemicals, hot surfaces, or sharp or

abrasive objects.

TOOLS NEEDED

10 mm Socket

(optional)

8 mm Socket

(optional)

Impact Wrench with Socket Adapter

(optional)

+

8 mm Wrench

10 mm Wrench

14 mm Wrench

Phillips Screwdriver

Para Español, vea páginas 9-16.

Pour le français, consulter les pages 17-24.

Produktspezifikationen