V-TAC VT-42024 Bedienungsanleitung

V-TAC Beleuchtung VT-42024

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-42024 (10 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.4 Sternen bewertet

Seite 1/10
WEEE Number: 80133970
INTRODUCTION & WARRANTY
Thank you for selecting and buying MAGNETIC SMART TRACKLIGHT V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep this manual handy for
future reference. If you have any other query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best. The warranty is
valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incor-
rect installation or abnormal wear and tear. The company gives no warranty against damage to any
surface due to incorrect removal and installation of the product. The products are suitable for 10-12
Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
TECHNICAL DATA
MODEL
SKU
INPUT VOLTAGE
LUMENS
POWER
BEAM ANGLE
CRI
IP RATING
VT-42112-S
10275
DC:48V
1270LM
11W
200’D
>80
IP20
VT-42024-S
10276
DC:48V
2810LM
23W
200’D
>80
IP20
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
INSTRUCTION MANUAL
WORKS WITH
works with the
Google Assistant
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric shock.
1. Switch o the power.
2. Install the luminaire into the guide rail groove .
3. Check that everything is in order.
4. Switch on the power if above steps done properly without any mistakes.
WARNING
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a certied person.
INSTALLATION INSTRUCTION
1 2
3 4
N
L
APP INSTALLATION INSTRUCTIONS
Fig 1
Smart Life
Step 1: Turn the power button ON of the
device. Then follow the below instruction
for the device.
Step 2: Scan the given QR code, or down-
load “Smart Life’ from the App Store (iOS)
or the Google
Play Store (Android).
Step 3: Open the Smart Life app and tap on
register for creating a new account. If you
already
have an existing account, please proceed to
please proceed to logging in.(Ref Fig 1)
Step 8: To pair the device with LED Smart Strip Light make
sure the light is blinks rapidly.
Once the light blinks rapidly, the light is in pairing mode. If the
light is not blinking rapidly, you can do one of the following
steps:
intervals of less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link (as shown on
the image to the right)
C. You can also enable pairing mode from the Wi-Fi control-
ler. Press and hold the ON/OFF button for 5-7 seconds and
wait till you observe the light flashing. Please refer to the
instruction section "WI-FI CONTROLLER FUNCTIONS"
Network Modes
1) Smart Mode: Light flashes rapidly.
2) AP mode: Slow flash, once every 2 seconds.
Confirm if the light blinks rapidly, select the Wi-Fi network,
and enter the password.
4. Enable Bluetooth
and Home Wifi for the
device to access your
wifi connection for
pairing
5. Click “Add a device” or
“+” in the top right corner.
6. Click on the
Lighting
choose “Light
Source (Wi-Fi)“
7. Select 2.4GHz Wi-Fi
network and enter the
password


Produktspezifikationen

Marke: V-TAC
Kategorie: Beleuchtung
Modell: VT-42024

Brauchst du Hilfe?

Wenn Sie Hilfe mit V-TAC VT-42024 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten