V-TAC VT-8559 Bedienungsanleitung
V-TAC
Beleuchtung
VT-8559
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für V-TAC VT-8559 (11 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/11
492x71mm 500x85mm 495x66mm 495x85mm 490x70mm 400x70mm 390x80mm395x66mm 450x65mm
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully
before starting the installation and keep this manual handy for future reference. If you have any another query, please
contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at
the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by
incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product
for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
'This product contains a light source of energy eciency class <F>', where <F> shall be replaced by the energy
eciency class of the contained light source.
INTRODUCTION & WARRANTY
INSTRUCTION MANUAL
LED DOME LIGHT
ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage
within the range provided. It's forbidden to use the product with damaged protective cover. Product must not be
used in unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical
fumes, etc. In the area of strong electromagnetic interference, the functioning of the product may be disrupted.
• Please make sure to turn o the power before starting the installation.
• Installation must be performed by a certified person.
• The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole
luminaire should be replaced.
• Proper grounding should be ensured throughout the installation.
• For Indoor use only
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• Method of attachment of the cable or cord such that any replacement can only be made by the manufacturer, his
service agent or similar qualifed person.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
Replaceable light source
by a professional
LED
LED
WARNING
6500K
6500K
3000K
3000K 4000K
Turn up the Lumens
Night light Mode
MAX 5M
+10 30
60 90
Delete
Timing delay
+ 10 minutes
Until 240 minutes
Cancel the Timing
Timing 60 minutes
Timing 30 minutes
Timing 90 minutes
Turn down the Lumens
REMOTE CONTROLLER INSTRUCTIONS
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut o and the product has cooled down.
Clean only with so and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air
access. Product may heat up to a higher temperature. Product designed with non-replaceable light source of the
LED type. Product cannot be fixed if the light source becomes damaged. Remote control works on 2xAAA battery
(not included).
INSTALLATION INSTRUCTION
• Switch O the Power Before Starting the Installation.
• Twist and remove the cover (Ref Image Part 2)
• Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
• Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
• Twist and lock the cover to the light (Ref Image Part 5)
• Switch ON the power and test the light.
INSTALLATION DIAGRAM
MOUNTING
Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise caution.
Product has a protective contact /terminal. Failure to connect the protective lead may lead to electric shock.
Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to
first use.
L
Produktspezifikationen
| Marke: | V-TAC |
| Kategorie: | Beleuchtung |
| Modell: | VT-8559 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit V-TAC VT-8559 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung V-TAC
7 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
Bedienungsanleitung Beleuchtung
- Beleuchtung Ansmann
- Beleuchtung Samsung
- Beleuchtung Brennenstuhl
- Beleuchtung Laserworld
- Beleuchtung Behringer
- Beleuchtung Livarno
- Beleuchtung Blizzard
- Beleuchtung Abus
- Beleuchtung Omnilux
- Beleuchtung Intellytech
- Beleuchtung Sigma
- Beleuchtung Toolcraft
- Beleuchtung Maxcom
- Beleuchtung Axis
- Beleuchtung ChamSys
Neueste Bedienungsanleitung für -Kategorien-
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025