Vaxcel Bucktown W0475 Bedienungsanleitung

Vaxcel Beleuchtung Bucktown W0475

Lies die bedienungsanleitung für Vaxcel Bucktown W0475 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu Vaxcel Bucktown W0475 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Hardware Package (
included
):
Crossbar Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D)
W
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
W0475 / W0476
Page 1 / 2
Turn off the power at fuse or circuit box
Installation Steps
1. Unscrew the two bolt nuts (D), remove the crossbar unit (A) from the backplate.
2. Attach the crossbar unit (A) to the outlet box using two mounting screws (B). Adjust the length of the preinstalled fixture
mounting screws if necessary.
Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Fixture Mounting Screw
Crossbar Unit (A)
Fixture Wire
Backplate
Bolt Nut (D)
Fixture
Fixture Ground Wire
Max. 40W
Candelabra base
bulb (not included)
Glass Holder
Glass Shade
240422


Produktspezifikationen

Marke: Vaxcel
Kategorie: Beleuchtung
Modell: Bucktown W0475

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vaxcel Bucktown W0475 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten