Vaxcel P0232 Bedienungsanleitung
Seiten 3 Beleuchtung
Lies die Bedienungsanleitung für Vaxcel P0232 kostenlos online oder lade das PDF herunter. 22 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
P0232
For Pendant Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Mounting Strap (A)Fixture Mounting
Screw(D)
Wire Connector (C)
For Pendant Installation Steps
Lock
Nut (F)
Canopy Cover Assembly
Ball Nut (G)
Ball Nut (G)
Socket
Glass Shade
Glass Holder
Outlet Box
House Ground Wire
Fixture Mounting Screw (D)
Mounting Strap(A)
Lock Nut(F)
Mounting Screw(B)
1. Thread two fixture mounting screws
through the mounting strap, and then
secure with two lock nuts. Adjust the
length of the fixture mounting screws
if necessary.
2. Attach the mounting strap to the outlet
box by using two mounting screws.
3. Measure the desired length of the
cord (A) from the canopy cover
assembly to the top side of the fixture
and leave an additional 9" of cord (B)
above the canopy cover assembly
(include the canopy). Then cut off the
unnecessary cord. (See Figure.1)
4. Adjust strain relief at 9" position from
the top of the cord.
5. Mark the 3" of cord (C) from the top of
the cord (B). Use a knife to peel off the
insulation of the cord (C) carefully to
expose the 3 wires on the inside.
(See Figure 1)
CAUTION: Too deep cutting may
damage the insulation layer of the three
wires inside.
6. Peel off the 3 wires from the top about 3/8" long(D) to expose
the copper for wiring.
7. Connecting the wires with wire connectors as follows:
171110
Green Grounding
Screw (E)
Mounting Screw (B)
Set Screw
Cord
Vintage Bulb Max.60W
(not included)
Strain Relief
D(3/8")
C(3")
B(9")
A
Figure. 1
Wire Connector (C)
Green Ground Screw (E)
Produktspezifikationen
| Marke: | Vaxcel |
| Kategorie: | Beleuchtung |
| Modell: | P0232 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vaxcel P0232 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Vaxcel
Vaxcel W0153 Bedienungsanleitung Vaxcel W0463 Bedienungsanleitung Vaxcel W0378 Bedienungsanleitung Vaxcel P0248 Bedienungsanleitung Vaxcel W0389 Bedienungsanleitung Vaxcel CH55606 Bedienungsanleitung Vaxcel W0450 Bedienungsanleitung Vaxcel H0287 Bedienungsanleitung
Alle Vaxcel Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Vaxcel VL55704 Bedienungsanleitung Vaxcel P0260 Bedienungsanleitung Vaxcel Rad P0373 Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
IKEA GÖMPYSSLING 106.151.59 Bedienungsanleitung Robert Abbey EG42X Bedienungsanleitung Robert Abbey CI42X Bedienungsanleitung Robert Abbey OB43X Bedienungsanleitung Robert Abbey CR20X Bedienungsanleitung IKEA VINDKRAFT 606.013.05 Bedienungsanleitung Robert Abbey 463 Bedienungsanleitung Robert Abbey D1988 Bedienungsanleitung Robert Abbey Z1000 Bedienungsanleitung Halsey Taylor MFWS230 Bedienungsanleitung