Vemer RX.16A Bedienungsanleitung
Vemer
Nicht kategorisiert
RX.16A
Lies die bedienungsanleitung für Vemer RX.16A (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Vemer RX.16A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
1
User Manual
REMOTE ACTUATOR RX.16A
Read all instructions carefully
The remote actuator RX.16A is an automatic control device with
independent installation designed to receive radiofrequency signals coming
from Vemer radiofrequency devices.
It performs actions of type 1B and it is intended for operating in rooms
or similar with pollution overload category III and degree of pollution 2
(EN60730-1).
Code Model Description
VE736500 RX.16A Flush mounting remote actuator
SAFETY WARNINGS
During the product installation and opeartion it is necessary to observe the
following instructions:
1) The product must be installed by a qualified person;
2) Do not power the product during installation;
3) Do not power or connect the product if any parts appears to be damaged.
4) The product must be installed in compliance with the wiring diagrams of this
manual and on the product.
5) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
6) The instruments must be installed and activated in compliance with current
electric system standards.
7) In the electrical system of the building where the instrument must be
installed, a switch and a protection device from the overcurrents must be
present.
TECHNICAL SPECIFICATIONS
• Power supply: 230 Vac (-15% ÷ +10%) 50/60 Hz
• Output: bistable relay with interruption power of 16(8) A / 250 Vac
• Max distance from transmitter: 30 meters in inside homes
• Operating antenna frequency: 433.92 MHz
• Operating temperature: 0 ÷ 40°C
• Storage temperature: -10°C ÷ 70°C
• Enclosure: suitable for the flush mounting box (one module dimension)
• Degree of protection: IP20
• Type of action: 1B
1 2 3 4 5
230V
COM
~
NO
3
4
DIMENSIONS
WIRING DIAGRAMS
INSTALLATION
2
V3IS00805-010-202306
Vemer S.p.A.
I - 32032 Feltre (BL) • Via Camp Lonc, 16
e-mail: info@vemer.it - web site: www.vemer.it
Mod. RX.16A
Manuals
download
PDF
1
2
INDICATIONS AND CONTROLS
1 – Channel configuration key
2 – Bicolor red/green operating state indicator
information to users pursuant to art. 14 of the directive
2012/19 / EU of the european parliament and of the council
of 4 july 2012 on waste electrical and electronic equipment (WEEE)
If the crossed-out bin symbol appears on the equipment or packaging,
this means the product must not be included with other general waste
at the end of its working life.
The user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one.
Products for disposal can be consigned free of charge (without any new purchase obligation)
to retailers with a sales area of at least 400 m
2
, if they measure less than 25 cm.
An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its
subsequent recycling, helps avoid the potential negative effects on the environment and people’s health,
and encourages the re-use and/or recycling of the construction materials.
5
OPERATION
REFERENCE STANDARS
Compliance with Community Directives: 2014/53/UE (RED)
is declared in reference to the harmonized standars:
• EN 60730-2-7 • ETSI EN 301 489-1 • ETSI EN 301 489-3
• ETSI EN 300 220-1 • ETSI EN 300 220-2
The full text of the EU declaration of conformity is available at the Internet address
www.vemer.it
06-2023
• After switching on the red LED flashes twice for half a second (switching-on
sequence).
• Once lighting sequence is over, the green LED lights to inform about normal
operation and the red led lights to give the corresponding state of the channel
(switched on = ON).
• The command device (transmitter) requires the combined relay actuation
(relay ON/OFF) only after the channel configuration.
• When radio link interruption between transmitter and receiver is over 15 min,
the relay is disabled and the red LED flashes. Reset is automatic.
Channel configuration
• During normal operation, hold down the key for almost three seconds to enter
configuration mode. Green LED is off while red LED flashes.
• The product holds configuration mode for max 60 seconds, within this period
the actuator must receive a configuration string from the command device.
(see instructions for string input mode).
• When string is received, the channel is configured and the actuator restarts
its normal operation.
• To reconfigure the channel, repeat the procedure.
• To reset the channel configuration, enter the configuration mode (holding
down the key for almost 3 seconds until the red LED restarts flashing), then
hold down the key for almost three seconds until the green LED lights.
Every new configuration resets the previous one.
Produktspezifikationen
| Marke: | Vemer |
| Kategorie: | Nicht kategorisiert |
| Modell: | RX.16A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vemer RX.16A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Vemer
5 Juli 2025
2 Oktober 2024
22 September 2024
22 September 2024
18 September 2024
13 September 2024
4 September 2024
2 September 2024
26 August 2024
15 August 2024
Bedienungsanleitung Nicht kategorisiert
- Moulinex
- Highpoint
- Snaptain
- Schuberth
- IGet
- Nils
- Javalo Elf
- Sirius
- ChiliTec
- Karibu
- Beper
- Nowsonic
- Q-CONNECT
- Race Sport
- SinuPulse
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026