Victron Energy Automotive IP65 Bedienungsanleitung

Victron Energy Ladegerät Automotive IP65

Lies die bedienungsanleitung für Victron Energy Automotive IP65 (72 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Victron Energy Automotive IP65 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/72
Manual
EN
Handleiding
NL
Manuel
FR
Anleitung
DE
Manual
ES
Användarhandbok
SE
Appendix
Automotive IP65 Charger 12V/4A – 12V/0,8A
2
3
EN NL FR DE ES SE
1. Introduction
This charger has been designed for charging a variety of 12V
lead acid batteries, such as WET, GEL and AGM, which are
widely used for cars, motorcycles and other vehicles. Battery
capacities range from 1,2Ah to 120Ah. Full protection against
reverse polarity and short-circuiting ensures that the charging
operation is much safer. The charger will wait until a charging
mode has been selected before a connected battery can be
charged.
2. Indicator panel
LED
STATE
STANDBY
Standby, or stopped due to bad connection
<14Ah Mode 1 (14,4V/0,8A) selected
>14Ah Mode 2 (14,4V/4A ) selected
COLD Mode 3 (14,7V/4A ) selected
!
Reverse connection detected, check polarity
CHARGE Battery is being charged
FULL Battery fully charged


Produktspezifikationen

Marke: Victron Energy
Kategorie: Ladegerät
Modell: Automotive IP65

Brauchst du Hilfe?

Wenn Sie Hilfe mit Victron Energy Automotive IP65 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten