Vivotek AP-FIC-010A-015 Bedienungsanleitung


Seiten 1 Engels Nicht kategorisiert

Lies die Bedienungsanleitung für Vivotek AP-FIC-010A-015 kostenlos online oder lade das PDF herunter. 26 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|||T:+886-2-82455282F:+886-2-82455532E:sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|||T: 408-773-8686F: 408-773-8298E: salesusa@vivotek.com
VIVOTEK Netherlands B.V.
Busplein 36, 1315KV, Almere, The Netherlands
Non-PoE Switch
Data INP+D OUT
100~240V AC
PoE
PWR
1. Use CAT5 or 5e UTP/STP cables.
2. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 19W.
AP-FIC-010A(B)-015 FE PoE Injector
Quick Installation Guide
ModelDescription
AP-FIC-010A-015 FEStandard 802.3af 15.4W output
AP-FIC-010B-015 FEPassive 15.4W output
IMPORTANT:
INTRODUCTION
CONNECTION
* 1x PoE injector* 1x AC power cord
* 1x Quick Installation Guide
PACKAGE CONTENTS
All specications are subject to change without noice.
Copyright © 2014 VIVOTEK INC. All rights reserved.
Installation Steps:
1. Connect the included AC power cord to the injector. The Power LED (Green) should be lit.
2. Connect the Data IN port to a LAN switch using an Ethernet cable.
3. Connect the Power+Data OUT port to a powered device, i.e., IP camera, using another Ethernet cable. Make sure the
PoE LED (Yellow) is lit.
4. Check if the powered device (IP camera) is working properly. An IP camera may take up to 1 or 2 minutes to power up.

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Vivotek
Kategorie: Nicht kategorisiert
Modell: AP-FIC-010A-015

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vivotek AP-FIC-010A-015 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten