Vivotek AU-002 Bedienungsanleitung
Vivotek
Nicht kategorisiert
AU-002
Lies die bedienungsanleitung für Vivotek AU-002 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 72 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 36.5 Bewertungen. Hast du eine Frage zu Vivotek AU-002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3

AU-002
Network Speaker Driver
SIP & UDP • 20W • PoE+ • HTTPS
• Support SIP and UDP Broadcast Protocol
• Build in 20W Power Amplier to Drive Speaker Directly
• Powered from the Network Cable Using PoE+ IEEE 802.3at
• Remote Conguration and Firmware Upgrade by HTTPS

Application
VAST 2
Speaker Cable
PoE
Data
PoE Switch AU-002
Analog Speaker
Existing PA Speaker
AU-002
25 mm
110 mm
85 mm
Dimensions
Overview
AU-002 Network Speaker Driver provides the solution to convert traditional analog speaker to network speaker.
It can accept standard SIP call or multiple addressable UDP broadcast protocol supports network or Internet.
This IP driver supports standard VoIP CODEC like: G.711, G.722, G.726, G.729, it 32Kx 16bit CD quality music
playback function.
AU-002 is also compatible with VAST 2 for all the functionalities and allow users to upload their own audio clips on
VAST 2 for broadcasting.

Technical Specications
Model AU-002
Specication
Driver Impedance Lower to 3 ohm speaker totally
Average Min. Power 20W
Microphone 100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
LED Luminous 3 x LED display status
Network
SIP Support RFC 3261(SIP base standard)
Interface WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
Supported Protocols
SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP,
SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
Audio Codec G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
Support Function Auto provision, Audio tone testing, System log
Security Password protection, IP address lter, user access log, authentication
VAST 2 Integration (Extension License Required)
Two-way Communication Supported
Automatic Trigger Audio Clips Supported
General
Casing Plastic
Power PoE+ (Power over Ethernet), IEEE 802.3at
Operating Temperature -35°C ~ 60°C (-31°F ~ 140°F)
Dimensions 110x85x25 mm
Weight 115 g
Certications CE, FCC, LVD EN62368-1
Warranty 24 months
All specications are subject to change without notice. Copyright © VIVOTEK INC. All rights reserved. Ver. 2
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. | T: +886-2-82455282 | F: +886-2-82455532 | E: sales@vivotek.com | W: www.vivotek.com
Produktspezifikationen
Marke: | Vivotek |
Kategorie: | Nicht kategorisiert |
Modell: | AU-002 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vivotek AU-002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Vivotek
10 Juli 2025
16 August 2024
16 August 2024
15 August 2024
14 August 2024
14 August 2024
14 August 2024
13 August 2024
13 August 2024
13 August 2024
Bedienungsanleitung Nicht kategorisiert
- Pliant Technologies
- MB Quart
- Gem Toys
- Enbrighten
- Chicco
- Escort
- Pentacon
- DJ Power
- Audiotec Fischer
- Forza
- Franken
- Grimm Audio
- Vixen Go
- Aigostar
- Hoover
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025