Wasp WLR8900 Bedienungsanleitung
Wasp
Barcode-Leser
WLR8900
Lies die bedienungsanleitung für Wasp WLR8900 (41 Seiten) kostenlos online; sie gehört zur Kategorie Barcode-Leser. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Wasp WLR8900 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/41
WLR 8900/8905
Programming Guide
Please Read
Note:
The Wasp WLR 8900/8905 Scanner is ready to scan the
most popular bar codes out of the box. This manual
should onl be used to make changes in they
configuration of the scanner for specific applications.
This scanner does not require software or drivers to
operate. The scanner enters data as keyboard data. Please
review this manual before scanning any of the programming
bar codes in this manual.
Tech Tip
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the default
bar code on page 6. This will reset the scanner to its
factory settings.
Check Version
© Copyright Wasp Technologies 2006
All rights reserved. Ver AMC-a-1.01
No part of this publication may be reproduced or transmitted in any form
or by any means without the written permission of Wasp Technologies. The
information contained in this document is subject to change without notice.
Wasp is a trademark of Wasp Technologies. All other trademarks or registered trademarks are the
property of their respective owners.
Table of Contents
Chapter 1. Introduction ..............................................................................1
Chapter 2. Bar Code Symbologies............................................................2
Chapter 3. Installation................................................................................3
Chapter 4. Quick Start ..............................................................................4
Chapter 5. WLR 8900/8905 Setup & Configuration ............................5-28
1. Factory Default & Keyboard Connection ....................6
2. Autosense Stand Mode ..............................................6
3. Beep and Delay ......................................................7-8
4. Upper/Lower Case......................................................9
5. Keyboard Language ................................................10
6. Preamble/Postamble Configuration ..........................11
7. Terminator/Code ID ..................................................12
8. Enable/Disable Bar Code Symbologies ..............13-14
9. Bar Code Symbology Settings ............................15-27
Code 39 ..........................................................15
Interleaved 2 of 5 and Code 93 ......................16
Code 128 and UCC/EAN 128..........................17
MSI/Plessey ....................................................18
Codabar ..........................................................19
UPC-A..............................................................20
UPC-A Supplemental / UPC-A to EAN-13 ......21
UPC-E..............................................................22
UPC-E Supplemental ......................................23
EAN-8 ..............................................................24
EAN-8 Supplemental ......................................25
EAN-13 ............................................................26
EAN-13 Supplemental ....................................27
Appendix A Bar Code Test Symbols ....................................................28-30
Appendix B ASCII Table ......................................................................31-34
Appendix C Codes for PC ........................................................................35
Appendix D Technical Specifications ........................................................36
Product Support ....................................................................37
Warranty ................................................................................37
Frequently Asked Questions..................................................38
Produktspezifikationen
| Marke: | Wasp |
| Kategorie: | Barcode-Leser |
| Modell: | WLR8900 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wasp WLR8900 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Wasp
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
Bedienungsanleitung Barcode-Leser
- Datalogic
- QUIO
- Datamax-O'neil
- DeLOCK
- Renkforce
- Steren
- Mach Power
- Manhattan
- Socket Mobile
- ELO
- Tecno
- Deltaco
- Brady
- Adesso
- DENSO
Neueste Bedienungsanleitung für -Kategorien-
20 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
12 Juni 2025
12 Juni 2025
10 Juni 2025
8 Juni 2025
30 November 2024
30 November 2024