Wasp WLS9500 Bedienungsanleitung


Lies die bedienungsanleitung für Wasp WLS9500 (41 Seiten) kostenlos online; sie gehört zur Kategorie Barcode-Leser. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 17.5 Bewertungen. Hast du eine Frage zu Wasp WLS9500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/41
WandReader
Programming Guide
Please Read
Note:
The Wasp WandReader is ready to scan the most popular
bar codes out of the box. This manual should only be
used to make changes in the conguration of the
scanner for specic applications. This scanner does not
require software or drivers to operate. The scanner enters
data as keyboard data. Please review this manual before
scanning any of the programming bar codes in this manual.
Tech Tip
If you are unsure of the scanner conguration or have
scanned the incorrect codes, please scan the default
bar code on page 6. This will reset the scanner to its
factory settings.
© Copyright Wasp Technologies 2002.
All rights reserved.V4.0.
No part of this publication may be reproduced or transmitted in any form
or by any means without the written permission of Wasp Technologies.
The information contained in this document is subject to change without
notice.
Wasp is a trademark of Wasp Technologies. All other trademarks or registered trademarks are the
property of their respective owners.
Table of Contents
Chapter 1. 1Introduction..............................................................................
Chapter 2. 2Bar Code Symbologies............................................................
Chapter 3. Installation................................................................................3
Chapter 4. Quick Start ..............................................................................4
Chapter 5. WandReader Setup & Conguration ..................................5-28
1. Factory Default & Keyboard Connection....................6
2. Beep and Delay ......................................................7-8
3. Upper/Lower Case......................................................9
4. Keyboard Language ................................................10
5. Preamble/Postamble Conguration..........................11
6. Terminator/Code ID..................................................12
7. Enable/Disable Bar Code Symbologies..............13-14
8. Bar Code Symbology Settings............................15-27
Code 39 ..........................................................15
Interleaved 2 of 5 and Code 93 ......................16
Code 128 and UCC/EAN 128..........................17
MSI/Plessey ....................................................18
Codabar ..........................................................19
UPC-A..............................................................20
UPC-A Supplemental ......................................21
UPC-E..............................................................22
UPC-E Supplemental ......................................23
EAN-8 ..............................................................24
EAN-8 Supplemental ......................................25
EAN-13 ............................................................26
EAN-13 Supplemental ....................................27
Appendix A Bar Code Test Symbols....................................................28-30
Appendix B ASCII Table ......................................................................31-34
Appendix C Codes for PC ........................................................................35
Appendix D Technical Specications ........................................................36
Product Support ....................................................................37
Warranty ................................................................................37
Frequently Asked Questions..................................................38


Produktspezifikationen

Marke: Wasp
Kategorie: Barcode-Leser
Modell: WLS9500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Wasp WLS9500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten