Watts WFHTRF 01 -20033 Bedienungsanleitung

Lies die bedienungsanleitung für Watts WFHTRF 01 -20033 (18 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 17 Bewertungen. Hast du eine Frage zu Watts WFHTRF 01 -20033 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

USER GUIDE GB

RF basic thermostat WFHTRF 01 (20033)

TECHNICAL CHARACTERISTICS

MODES DESCRIPTION

LED INDICATOR

Red: - Heating indication (During consign adjustment)

Red Blinking: - 1 second cycle => Low batteries indication.

Green blinking:- Radio transmission (1 flash by transmission)

Room

setting.

Select

mode.

LED Indicator.

PPL IMP 1134A

Measured temperature

precision0.1°C (or 0.2°F)

Operating temperature0°C - 50°C (or 32°F – 122°F)

Setting temperature range5°C – 30°C (or 41°F - 86°F)

Regulation

characteristics Proportional band 15min for 2°K

Electrical ProtectionClass II - IP30

Power Supply

Battery operated life 2 x 3V (CR2430)

~ 2 years

Radio frequency 433.92 MHz, <10mW.

certifications CE. EN 301489-1, EN 300220-1

(Radio frequency certifications)

Soft version V 2.0x

RADIO CONFIGURATION MODE

Batteries

- Turn the thermostat in Off position.

- To assign (*) the RF thermostat with the receiver you must put the

receiver in “RF init” mode (please refer to the receiver leaflet).

- After you have just made the thermostat in or mode.

The thermostat sends its configuration address by radio signal. (The

thermostat LED blinks green)

*

(

In this mode the thermostat should be near the receiver

)

- Radio frequency RF thermostat (433.92 Mhz) specially designed for water floor

heating.

- Personal code on each product.

- Equipped with a switch to select 3 different operating modes:

-Comfort (The thermostat follow the setting temperature)

- Off

-

Night reduction (The thermostat follow the setting temperature – 4°C)

- To be used only with ours receivers.

Produktspezifikationen