Westinghouse PWSC16.5 Bedienungsanleitung

Lies die bedienungsanleitung für Westinghouse PWSC16.5 (2 Seiten) kostenlos online; sie gehört zur Kategorie Hochdruckreiniger. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu Westinghouse PWSC16.5 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WARNING

Do not use for commercial use. User must read and understand the user

manual for the pressure washer before using this accessory to reduce the risk

of injury. Before beginning any cleaning activity, spray the pressure stream in

a safe direction to be sure that all accessories are connected properly in order

to minimize the danger of injury or property damage. This product fits most

pressure washers. Before using this attachment, be sure it is compatible and is

correctly installed. Risk of fluid injections. Do not point at people, pets, electrical

devices, or the unit itself. Wear eye protection designated to conform with ANSI

Z87.1. Before adding, replacing, or modifying accessories, turn off the pressure

washer, release the water pressure in the trigger handle, and lock out the trigger

handle (if one is provided with the pressure washer). Use only with cold water

and only outdoors. Store the accessory indoors. Retain these guidelines. Use

these instructions to train other users and refer to them frequently. Give the user

of the tool these instructions as well.

PRODUCT SPECIFICATIONS

Connection1/4 in. Quick Connect Plug Inlet .................................................................

Width of Deck16.5 in. ..................................................................................................

Maximum Pressureup to 3400 psi ...............................................................................

Minimum Pressure2500 psi ........................................................................................

Maximum Water Flow2.7 GPM ....................................................................................

Minimum Water Flow1.1 GPM .....................................................................................

Maximum Water Temperature140°F ............................................................................

APPLICATIONS

Use this product for the purpose(s) listed below:

lCleaning decks, sidewalks, and driveways

INSTALLING THE SURFACE CLEANER

See Figure 1.

lIf necessary, remove the nozzle from the end of the lance.

lPull back the quick-connect collar (1) and insert the inlet adapter (2). Push the

quick-connect collar forward to lock.

Be sure the surface cleaner is securely locked into the lance before use.NOTE:

WARNING

Only use the surface cleaner on flat, horizontal surfaces. To reduce the risk of

injection or injury, never lift the surface cleaner from the cleaning surface while

operating the pressure washer.

USING THE SURFACE CLEANER

lPut the surface cleaner on the horizontal surface being cleaned and start the pressure

washer.

lSqueeze the trigger and move slowly to allow the unit to clean the surface

NOTE: Swirling or striping in the cleaned surface indicates moving too quickly. If a

slower pace doesn’t stop the condition, the surface cleaner nozzles may be clogged.

See to clean the nozzles.Nozzle Maintenance

WARNING

Avoid striking any raised obstacles while using the surface cleaner. Damage may

occur to the unit. If contact occurs and a higher vibration of the unit begins

during use, release the trigger and discontinue use. Continuing use could result

in serious injury or damage to the unit.

NOZZLE MAINTENANCE

See Figure 2.

The surface cleaner comes assembled. The nozzles are approved for use with pressure

washers operating at 2500 to 3400 PSI with a maximum flow rate of 2.7 GPM (1.1

GPM minimum).

A pulsing sensation felt while squeezing the trigger and/or a higher vibration in the

surface cleaner may be the result of a clogged or dirty nozzle.

lTurn off the pressure washer and turn off the water supply. Put the unit on the

ground and pull the trigger to release the water pressure in the lance.

lPull back the quick-connect collar to disconnect the surface cleaner from the lance.

lUse a nozzle cleaning tool (2) to free any foreign materials that are restricting the

nozzle (1).

lUse a garden hose to back-flush the nozzle and force out the debris.

Never point the nozzle outlet at your face.NOTE:

FIG. 1

FIG. 2

Customer Service: (855) 944-3571

777 Manor Park Drive, Columbus, OH 43228

and Westinghouse are trademarks of Westinghouse Electric Corporation.

Used under license by MWE Investments, LLC.

© 2024 MWE Investments, LLC All Rights Reserved.

lReconnect the surface cleaner to the lance.

lTurn on the water supply and start the pressure washer to resume cleaning.

REPLACING THE HIGH-PRESSURE FILTER

See Figure 3.

If the water still doesn’t flow freely after cleaning the deck nozzles, it may be necessary

to replace the high-pressure filter. Replacement filters are available by going to our

parts website at .parts.wpowereq.com

lTurn off the pressure washer and turn off the water supply. Put the unit on the

ground and pull the trigger to release the water pressure in the lance.

lDisconnect the surface cleaner from the lance.

lInsert a slotted screwdriver into the slot of the filter and turn counterclockwise to

remove.

lInsert the new filter (1) into the inlet plug.

lTurn the filter clockwise with the slotted screwdriver until it is inside the inlet adapter

and no longer visible above the top of the adapter.

REPLACEMENT PARTS

For replacement parts, please call customer service.

NozzlePWSCRN ...........................................................................................................

High-pressure FilterPWSCHPF ....................................................................................

Nozzle Cleaning ToolPWSCCT .....................................................................................

PWSC16.5 PLASTIC SURFACE CLEANER

FOR WESTINGHOUSE PRESSURE WASHERS UP TO 3400 PSI

FIG. 3

PF130000

10/25/24

Produktspezifikationen