Westinghouse PWUC Bedienungsanleitung

Lies die bedienungsanleitung für Westinghouse PWUC (2 Seiten) kostenlos online; sie gehört zur Kategorie Hochdruckreiniger. Dieses Handbuch wurde von 49 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 25 Bewertungen. Hast du eine Frage zu Westinghouse PWUC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

WARNING

Do not use for commercial use. User must read and understand the operator’s manual for their

pressure washer before using this accessory to reduce the risk of injury. Before beginning any

cleaning activity, spray the pressure stream in a safe direction to make sure that all accessories

are connected properly in order to minimize the danger of injury or property damage. Fits most

pressure washers. Before using this attachment, make sure it is compatible and is correctly

installed. Risk of fluid injections. Do not point at people, pets, electrical devices, or the unit

itself. Wear eye protection designated to conform with ANSI Z87.1. Before adding, replacing,

or modifying accessories, turn off the pressure washer, release the water pressure in the

trigger handle, and lock the trigger handle’s lock out (if one is provided with your pressure

washer). Use only with cold water and only outdoors. Store the accessory indoors. Save these

guidelines. Use them to train other users and refer to them frequently. Give the user of the tool

these instructions as well.

PRODUCT SPECIFICATIONS

Connections1/4 in. QD Plug ................................................................................................................

Broom Width16 in. ...............................................................................................................................

Maximum Pressure4,000 psi ...............................................................................................................

Minimum Pressure2,200 psi ...............................................................................................................

Maximum Water Flow.4.0 gpm ...........................................................................................................

Minimum Water Flow.2.0 gpm ............................................................................................................

Maximum Water Temperature194°F (90°C) .........................................................................................

NOTE: Consult your pressure washer’s operator manual for its maximum operating water temperature.

APPLICATIONS

You may use this product for the purpose(s) listed below:

lCleaning decks, sidewalks, and driveways

lCleaning the undercarriage of trucks, SUVs, cars, commercial vehicles and trailers

INSTALLING THE WATER BROOM ON THE SPRAY WAND

See Figures 1-2.

Your water broom comes with two straight extension wands and one 90 degree extension wand. The

extension wands can be used in multiple configurations as needed for your project.

lInsert the water broom inlet plug into one of the straight extension wands. Pull back the quick

connect coupler and secure. Repeat with the second spray extension wand if additional length is

needed.

lConnect the 90 degree spray extension wand to the second straight spray extension wand. Secure

with the quick connect coupler.

lInsert the end of the 90 degree spray extension wand into the pressure washer’s spray lance and

secure with the quick connect coupler.

Be sure the water broom is securely locked into the lance before use.NOTE:

WARNING

Only use the water broom on flat, horizontal surfaces. To reduce the risk of injection or injury,

never lift the water broom from the cleaning surface while operating the pressure washer.

USING THE WATER BROOM

See Figure 3.

lAfter installing the water broom, connect the hose to the pressure washer as described in your

pressure washer manual.

lPull the pivot knob out and move the pivot coupler forward or back to achieve the desired nozzle

orientation.

lUse with the nozzles pointed down and forward (pivot coupler in back position) to wash large flat

surfaces like sidewalks or driveways.

lTo clean the underside of raised items like your car’s undercarriage, pivot so the nozzles are pointed

upward (pivot coupler in forward position).

lPlace the water broom on the horizontal surface being cleaned and start the pressure washer.

lSqueeze the trigger and move slowly allowing the unit to clean the surface.

lWalk slowly behind the water broom, cleaning as you go.

NOTE:Swirling or striping in the cleaned surface indicates you may be moving too quickly. If a

slower pace doesn’t stop the condition, the water broom nozzles may be clogged. See Nozzle

Maintenance to clean the nozzles.

WARNING

Avoid striking any raised obstacles while using the water broom as damage may occur to the

unit. Continuing use could result in serious injury or damage to the unit.

WARNING

To reduce the risk of injection or injury, do not depress the trigger until the water broom nozzles are

completely underneath the surface being cleaned, and always release the trigger before removing the

water broom from underneath the surface.

NOZZLE MAINTENANCE

See Figure 4.

The water broom comes assembled. The nozzles are approved for use with pressure washers operating

at 2200 to 4000 PSI with a maximum flow rate of 4.0 GPM (2.0 GPM minimum).

A pulsing sensation felt while squeezing the trigger and/or a higher vibration in the water broom may

be the result of a clogged or dirty nozzle.

lTurn off the pressure washer and shut off the water supply. Place unit on the ground and pull the

trigger to release the water pressure in the lance.

lPull back the quick-connect collar to disconnect the water broom from the lance.

lUse a nozzle cleaning tool or a fine needle to free any foreign materials that are clogging or restricting

the nozzle.

lUse a garden hose to back-flush the nozzle and force out the debris.

Never point the nozzle outlet at your face.NOTE:

lReconnect the water broom to the lance.

lTurn on the water supply and start the pressure washer to resume cleaning.

FIG. 1

FIG. 2

A - Inlet adapter [adaptador de entrada, adaptateur d’entrée]

B - Quick connect coupler [acoplador de conexión rápida, coupleur à connexion rapide]

C - L-wand [varita en L, baguette en L]

D - Straight wand [varita recta, baguette droite]

Service Hotline: 1-855-944-3571

777 Manor Park Drive, Columbus, OH 43228

and Westinghouse are trademarks of Westinghouse Electric Corporation.

Used under license by MWE Investments, LLC.

© 2023 MWE Investments, LLC All Rights Reserved.

REPLACING THE FILTER SCREEN

See Figure 5.

If the water still doesn’t flow freely after cleaning the nozzles, it may be necessary to replace the filter

screen. Replacement filter screens are available by calling our Service Hotline at 1-855-944-3571.

lTurn off the pressure washer and shut off the water supply. Place unit on the ground and pull the

trigger to release the water pressure in the lance.

lDisconnect the surface cleaner from the lance.

lUsing a screwdriver or pair of tweezers, remove the retaining ring and filter screen from the inlet

plug.

lOnce the filter screen is removed from the inlet plug, replace it with a new filter screen (not included).

lMake sure the filter screen is seated inside the inlet adapter and no longer visible above the top of

the adapter.

lReinstall the retaining ring and push into place until it is secure against the filter screen.

REPLACEMENT PARTS

Replacement parts are available from our Service Hotline at (855) 944-3571.

NozzleBSWB16WA01 ..........................................................................................................................

Filter ScreenBSWB16WA02 .................................................................................................................

PWUC WATER BROOM /

UNDERCARRIAGE WASHER

FIG. 3

FIG. 4

BSWB16WM01 11/9/23 (REV:01)

FOR WESTINGHOUSE PRESSURE WASHERS UP TO 4000 PSI

A

B

A

B

A - Pivot knob [perilla de pivote, bouton de pivot]

B - Pivot coupler [acoplador de pivote, coupleur à pivot]

A

B

FIG. 5

A - Needle [aguja, aiguille]

B - Nozzle [boquilla, buse]

A - Filter [filtro, filtre]

B - Pivot coupler [acoplador de pivote,

coupleur à pivot]

B

A

Produktspezifikationen