Whynter KS-1100 Bedienungsanleitung
Whynter
Küchenwaage
KS-1100
Lies die bedienungsanleitung für Whynter KS-1100 (6 Seiten) kostenlos online; sie gehört zur Kategorie Küchenwaage. Dieses Handbuch wurde von 17 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 9 Bewertungen. Hast du eine Frage zu Whynter KS-1100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
WHYNTER Digital Wall Kitchen Scale
MODEL: KS-1100
Please read this instruction booklet completely before operating.
SPECIFICATIONS
Equipped with a high precision strain gauge sensor system
Capacity: 2kgx1g
Auto off & Manual off
Tare function
Over load / Low battery indicator
Electronic clock, countdown timer with alarm
POWER SUPPLY
1 x 3V CR2032 lithium battery (included)
When the LCD indicates “ , please open the battery cover at the bottom of the unit and
replace the battery with a new one.
ASSEMBLE AND INSTALL THE SCALE TO THE WALL
(Please choose a smooth and flat wall surface to install the scale.)
STEP 1: Use the paper card as reference to drill 4 holes on the wall. (Make sure that the
reference card is horizontal)
STEP 2: Drill in the screw knots(plug) into the 4 holes
STEP 3: Install the fixture plates to the holes and drill in the screws tightly to secure the
plates.
STEP 4: Pull the insulating tape out of the battery cover of the scale.
STEP 5: Insert the scale to the fixture plates and press downwards then push to the right.
OPERATION
STEP 1: Pull down the glass platform of the scale.
STEP 2: Press the “ON/TARE” button and the scale will display “HELO”, and then zero.
The scale is now ready for weighing.
STEP 3: Put the food / ingredient on the glass platform, the weight will appear on the
display.
STEP 4: After use, press the “MODE” button, the system return to clock mode.
STEP 5: Push glass platform upwards when not in use.
TARE FUNCTION
STEP 1: In the weighing mode, put the container on the glass platform, the display will
show the weight of container.
STEP 2: Press the “ON/TARE” button again, the display will show zero. Put the food/
ingredient into the container, the weight of the food/ ingredient will appear on the display.
TIME SETTING
Press the “MODE” button for a few seconds to turn on the time setting function.
Minute will flash on the display.
Press the “UNIT” button to setup the minute.
Press the “MODE” button again, hour will flash on the display.
Press the “UNIT” button to setup the hour.
After finish setting the time, press the “MODE” button to exit Time Setting.
Produktspezifikationen
| Marke: | Whynter |
| Kategorie: | Küchenwaage |
| Modell: | KS-1100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Whynter KS-1100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Küchenwaage Whynter
19 April 2024
Bedienungsanleitung Küchenwaage
- Clatronic
- Domo
- Grundig
- Tristar
- Bifinett
- Westfalia
- Beper
- Salter
- MX Onda
- Sunbeam
- SOEM
- ADE
- Tescoma
- Smeg
- Kalorik
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
12 Juni 2025
10 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025