Wimberley AP-606 Bedienungsanleitung

Lies die bedienungsanleitung für Wimberley AP-606 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Wimberley AP-606 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

About the AP-606

Made in USA

Package Contents:

• Arca-Swiss Style QR Plate: AP-606 Replacement Foot (Qty 1)

• Mounting Screw: 1/4-20 x 7/16”L Flat Head Socket Cap Screw (Qty 2)

• Mounting Bushing: 3/8-16 to 1/4-20 (Qty 1)

• Safety Stop Screws:M3 x 3mm Socket Head Cap Screw (Qty 2)

• Hex Key:5/32 (Qty 1)

• Hex Key:2.5mm (Qty 1)

Instructions continued on back >>

Wimberley,Inc.Phone:1-434-529-8385

1750BroadwayStToll Free:1-888-665-2746(USA&Canada)

Charlottesville, VA

22902USAwww.tripodhead.cominfo@tripodhead.com

The AP-606 Replacement Foot fits the 200-800 RF f/6.3-9

Canon lenses and serves three main purposes:

1.Added Stiffness over the factory tripod mounting foot

connected to a lens plate, reducing flex and vibration.

2.Functions as the Arca-Swiss style quick-release plate

for your lens.

3.Creates a more ideal geometry for using your lens on

the Wimberley Sidemount Head and Sidekick, allowing

the lens to balance optimally.

Wimberley lens plates are compatible with Arca-Swiss style

quick-release clamps such as those made by Wimberley,

Kirk Enterprises, Really Right Stuff, Arca-Swiss, Markins,

and others.

Wimberley, Inc.Phone: 1-434-529-8385

1750 Broadway StToll Free:1-888-665-2746 (USA & Canada)

Charlottesville, VA

22902 USAwww.tripodhead.cominfo@tripodhead.com

Weight: 2.46 oz

Product Dimensions (L x W x H): 5.7” x 1.5” x 0.4”

Materials: Anodized 6061 Aluminum, Stainless Steel

AP-606

Quick-release Replacement

Foot for Canon:

200-800 RF f/6.3-9 IS

10 Year Warranty –See www.tripodhead.com/warranty.cfm for complete details

Installation Instructions

1. Install the enclosed bushing in the 3/8 hole (Fig. 1).

2. Attach the AP-606 plate to the lens using the enclosed

1/4-20 screws (Fig. 1).

3. Drive the screw in until you first meet resistance,

then turn it about 30° farther to establish appropriate, but

not excessive, torque. Do not over tighten; it is possible to

shear the head off the fastener with the hex key included.

4.Install safety stop screws as shown on page 2 (Fig. 3).

Safety stop screws are not required, however they keep

your lens and camera secure when using a compatible QR

clamp.

Figure 1

Produktspezifikationen