WyreStorm RX-70-4K-SCL Bedienungsanleitung

Lies die bedienungsanleitung für WyreStorm RX-70-4K-SCL (4 Seiten) kostenlos online; sie gehört zur Kategorie Audio-/Video-Extender. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu WyreStorm RX-70-4K-SCL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

4K HDBaseT™ Low Prole Receiver

with Scaling & Dual Ethernet Ports

RX-70-4K-SCL v1

Quickstart Guide

IMPORTANT! Installation Requirements

• Install the latest rmware to ensure that all features described in this

document are available.

• The following items are required forSetup and Conguration.

o PC or Mac

o Telnet and Terminal software such asPuTTY.

o USB to 3-pin Port Adapter Cable (Included)

o Network router and/or switch for quick conguration after installation

without the need to connect directly.

In the Box

1x RX-70-4K-SCL Scaling Receiver

1x 12V DC 3A Power Supply

1x AC Cable

2x 3-pin Phoenix Connector

1x IR Emitter

1x IR Receiver

1x USB to 3-pin RS-232 Port Adapter Cable

2x Mounting Brackets

1x Quickstart Guide (this document)

Additional Information

Setup and control of the receiver for functions such EDID and audio

volume commands can be found in theRX-70-4K-SCL API. This and other

documentation pertaining to this product can be found in the Downloads Tab

located on the product page atWyreStorm.com.

Copyright © 2017 WyreStorm Technologies | wyrestorm.com

RX-70-4K-SCL v1 Quickstart Guide | 171107

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

[email protected]

1 of 4

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation

process.

Basic Wiring Diagram

RX-70-4K-SCL

H2 Matrix with ARC

UHD Display

HDMI In

IR Emitter

IR Recei

Amplifier

ver

Ethernet

Cont

Cont

rol System

IR RX

CAB-IR-LINK (Sold Separately)

Cont

IRDigital AudioAnalog Audio

Key

HDMI/Digital VideoHDBaseT/Ethernet

or

Troubleshooting

No or Poor Quality Picture (snow or noisy image)

• Verify that power is being supplied to all devices in the system and that they

are powered on.

• Verify that all source and HDBaseT connections are not loose and are

functioning properly.

• Verify that the transmitter or matrix, receiving device, and display support

the output resolution congured in the receiver. Refer to Video Resolutions

in the Specications table before determining cable type and length.

• Verify that the receiving device and display support the output resolution of

the source.

• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated.

No or Intermittent 3rd party Device Control

• Verify that the IR cable(s) is properly terminated.

See IR RX (Receiver) Wiring.

• Verify that the IR emitter is located near the IR receiver on the device.

• Verify that the connected matrix is connected to a network

switch or router.

• Verify that the RS-232 cable is properly terminated per

the RS-232 Wiring section.

Troubleshooting Tips:

• WyreStorm recommends using a cable tester or connecting the cable to

other devices to verify functionality.

• Use a ashlight to locate the IR sensor behind any tinted panels on the

device being controlled. It will likely appear as a small round disc.

Produktspezifikationen