Alula RE605 Bedienungsanleitung

Lies die bedienungsanleitung für Alula RE605 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 83 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 42 Bewertungen. Hast du eine Frage zu Alula RE605 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

The RE605 Temperature Sensor is used to detect

freeze and overheat conditions. The sensor will alarm

when the temperature trip points are reached.

Features

• Indicates freeze and overheat warnings

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll by placing the panel into wireless enrollment

mode, and then removing the cover to send an

enrollment signal. Alternatively, the sensor can be

enrolled by scanning its bar code using the Connect+

Installer App or by entering its 8-character serial

number on the interactive service provider’s web portal.

The overheat input must be enabled as an additional

zone using the installer app or the interactive service

provider’s web portal.

Install by mounting the sensor in the desired location

using two #4 or #6 screws. An optional cover-securing

screw is included. Alternatively, the sensor can also be

installed using 3M™ VHB™ tape.

Freeze or Heat alarms are transmitted when the

temperature trip points are reached.

Temperature Trip Points

• Heat alarms when over 100°F (38°C)

• Heat restores when under 97°F (36°C)

• Freeze alarms when under 45°F (7°C)

• Freeze restores when over 48°F (9°C)

Pro Tips

3M™ VHB™ Tape works great if the surface is prop-

erly prepared and rm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface temperature is above 50°F

Use the panel installation guide to verify proper system setup.

Mounting Screw Holes

RE605 Temperature Sensor

Connect+

™

Encrypted

I

N

S

T

A

L

L

G

U

I

D

E

I

Cover-Securing Screw Hole

Options for sending an Enrollment Signal

• Remove the battery tab and cover to trip

tamper.

Produktspezifikationen