Alula RE619 Bedienungsanleitung
Seiten 2 Englisch Nicht kategorisiert
Lies die Bedienungsanleitung für Alula RE619 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 42 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage
Use the panel installation guide to verify proper system setup.
The RE619 Home Disaster is an integrated environmental
sensor that detects ood and extreme temperature
conditions.
Features
•Titanium probes for unmatched corrosion immunity
•Detects ood, freeze, and heat conditions
•Secure encrypted wireless transmissions
•5-year warranty
Enroll by placing the panel into wireless enrollment mode,
and then sending an enrollment signal from the sensor.
Alternatively, the sensor can be enrolled by scanning its
bar code using the Connect+ Installer App or by entering
its 8-character serial number on the interactive service
provider’s web portal. NOTE, freeze and heat inputs must
be enabled as additional zones using the installer app or
the interactive service provider’s web portal.
Install by placing the remote ood probe in the location
requiring ood or leak detection. If desired, the ood
probe can be screwed to the oor or baseboard. Next,
mount the sensor to the wall using the mounting screw
locations. Finally, connect the ood probe wires to the
sensor’s terminal blocks.
Detectswater pooled under the sensor and reports extreme
temperature conditions.
Default Temperature Trip Points
•Heat alarms when over 100°F (38°C)
•Heat restores when under 97°F (36°C)
•Freeze alarms when under 45°F (7°C)
•Freeze restores when over 48°F (9°C)
RE619 Home Disaster
™
Connect+
™
Encrypted
I
N
S
T
A
L
L
G
U
I
D
E
I
Mounting
Screw
Holes
Wire
Entry
Hole
Sending an Enrollment Signal
•Remove the battery tab and remove the cover
to trip the tamper
Produktspezifikationen
| Marke: | Alula |
| Kategorie: | Nicht kategorisiert |
| Modell: | RE619 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Alula RE619 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten