American Standard Town Square S T455740.002 Bedienungsanleitung

Lies die bedienungsanleitung für American Standard Town Square S T455740.002 (4 Seiten) kostenlos online; sie gehört zur Kategorie Duschsystem. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 3 Bewertungen. Hast du eine Frage zu American Standard Town Square S T455740.002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

- 1 -

Product names listed herein are trademarks of AS America, Inc.

© AS America, Inc. 2018

Thank you for selecting American Standard...

the benchmark of fine quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

RECOMMENDED TOOLS

ROUGHING-IN DIMENSIONS

CARE INSTRUCTIONS:

TOWN SQUARE

®

S

CENTRAL THERMOSTAT WITH

VOLUME CONTROL TRIM KIT

INSTALLATION

INSTRUCTIONS

T455740

Certied to comply with ANSI A112.18.1M

M965902 (4/18)

• To keep your new faucet looking new, please follow

these simple care instructions:

DO:

• Simply rinse the faucet clean with clear water.

• Dry the faucet with a soft cotton cloth.

DO NOT:

• Do not use any abrasive cleaners, cloths, or

paper towels.

• Do not use any cleaning agents containing

acids, polish abrasives, or harsh cleaners or

soaps.

• Regular and routine cleaning will reduce the need for

heavy cleaning and polishing. If heavy cleaning is

required, the following procedures are recommended:

• Remove as much surface dirt and lm using clear

water and soft cotton cloth (as described above).

• Use any of the following to remove tough surface

lm and build-up:

• Mild liquid detergents

• Clear ammonia free liquid glass cleaners

• Non-acidic, non-abrasive gentle liquid or fully dissolved

powder cleansers mixed according to manufacturers

directions.

• Non-abrasive liquid polishers

• Once clean, rinse faucet again with clear water to thoroughly

remove cleaner or polish and blot dry with a soft cotton cloth.

Failure to follow these care instructions may

damage the Faucet’s finish.

Flat Blade Screwdriver

Phillips Screwdriver

C

7-5/16"

(186 mm)

7-1/16"

(179 mm)

1-11/16"

(42 mm)

NOTE: FITTING

MUST BE INSTALLED

WITH VOLUME CONTROL

ON TOP.

R520

1/2" NPT INLETS

or

R540

3/4" NPT INLETS

FINISHED

WALL

9 "

(230 mm)

7-1/2"

(190 mm)

3/4"

(20 mm)

3-15/16"

(74 mm)

3-3/16"

(87 mm)

Produktspezifikationen