Arecont Vision MegaDome 2 AV3256 Bedienungsanleitung

Arecont Vision Sicherheitskamera MegaDome 2 AV3256

Lies die bedienungsanleitung für Arecont Vision MegaDome 2 AV3256 (20 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Arecont Vision MegaDome 2 AV3256 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/20
Arecont Vision MegaDome
®
2 Installation Manual
0 | Page
Arecont Vision MegaDome
®
2 Installation Manual
1 | Page
MegaDome
®
2 Installation Manual
Inside the box:
A. Arecont Vision MegaDome
®
2 camera
B. Mounting template
C. Rubber gasket (preinstall on bottom of
camera)
D. AC & DC power cable
E. I/O cable
F. Installation manual
G. CD with AV100 software and user
manuals (License Key Required for
Recording)
H. Pack of four (4) wood screws and four (4)
dry wall anchors
I. Security L-Key
J. One double-sided hex key
K. One single-sided hex key
Not included but needed:
#1 Phillips head screwdriver
#2 Phillips head screwdriver
Image 1
Mounting the Camera:
1. Remove the camera and hardware from the
box.
2. Using the mounting template, prepare the
mounting surface for camera installation.
NOTE: the 19.5mm diameter hole on the
Mounting template is where the Ethernet
cable will be exiting the MegaDome
®
, align
accordingly. If using the side conduit hole,
please see step 4 following.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover (Image 2).
Remove the vandal resistant dome cover.
NOTE: Do not remove the screws from the
dome cover.
Image 2
G
F
E
C
A
D
B
H
I
J
K


Produktspezifikationen

Marke: Arecont Vision
Kategorie: Sicherheitskamera
Modell: MegaDome 2 AV3256
WLAN: Nein
Bluetooth: Nein
Produktfarbe: Weiß
Übertragungstechnik: Kabelgebunden
Befestigungstyp: Decke/Wand
Netzstandard: IEEE 802.3af
Typ: IP-Sicherheitskamera
Betriebsanleitung: Ja
Unterstützte Videoformate: MPEG
Zoom-Fähigkeit: Ja
Formfaktor: Dome
Fokus: Motorisiert
Maximale Auflösung: 2048 x 1536 Pixel
Bis zu 30 Frames pro Sekunde: 21 fps
Megapixel insgesamt: 3 MP
Anzahl der Kameras: 1
Tag/ Nachtmodus: Ja
Mindestbeleuchtung: - Lux
Anzahl der Linsen: 1
Eingebaute HDD: Nein
Sensor-Typ: WDR
Wide Dynamic Range (WDR): Ja
Anzahl der Sensoren: 1
Datenschutz-Maskierung: Ja
Fester Fokus: Ja
Ethernet/LAN: Ja
Unterstützte Positionierung: Innen & Außen

Brauchst du Hilfe?

Wenn Sie Hilfe mit Arecont Vision MegaDome 2 AV3256 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten