Atlas Sound DT12 Bedienungsanleitung

Lies die bedienungsanleitung für Atlas Sound DT12 (18 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 10 Bewertungen. Hast du eine Frage zu Atlas Sound DT12 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. Using a measuring device, mark off 12.25" from one end of tile.

2. Carefully cut tile on mark using utility knife, drywall saw, or RotoZipTM

.

3. Remove E.O. box cover (A) on enclosure.

4. Use two wire nuts (included) to attach the red (+) and black (-) leads to the field

wiring.

5. Set tap selector switch (B) for desired power.

6. Install DT12 into the grid with the unit’s tile support edge facing out from the

installation location. If the speaker location is not favorable, the tile support

edge may be moved to the other side of the DT12.

7. Replace the cut section of acoustic tile.

Power Settings 25V / 70.7V: .25, .5, 1, 2, 4 watts and 8ȍ

Frequency Response:85 Hz - 8 kHz

Sensitivity:97 dB (1 W / 1 M)

NOTE:Wiring cavity is not intended to be used as a junction box.

A UL recognized conduit clamp must be used for conduit connections.

Installation must comply with all Building

Codes and NFPA guidelines.

Installation must adhere to N.E.C. and

NFPA 70/72 wiring directives

and comply with all National and

Local Building Codes.

Input

DT12

Full Range

4 Watts @ 70.7V

DT12

Full Range

4 Watts @ 70.7V

DT12

Full Range

4 Watts @ 70.7V

DT12

Full Range

4 Watts @ 70.7V

Typical Parallel Hookup of Full

Range 70.7 / 100V Speakers

Amplifier

Typical 120 Watt 70.7V Output

Tap Wattage Total: 16 Watts

AtlasSound.com

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.Specifications are subject to change without notice.

©2008 Atlas Sound ATS003230 RevA 8/08

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Installation Sheet for DT12

Acoustic Tile

Produktspezifikationen