Audio-Technica AT882TL Bedienungsanleitung

Lies die bedienungsanleitung für Audio-Technica AT882TL (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Audio-Technica AT882TL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Description

The AT882TL requires a phantom power supply of 11–52V DC for each element. Output

is low-impedance balanced. The balanced signal appears across Pins 2 and 3, while the

ground (shield) connection is Pin 1. Output is phased so that positive acoustic pressure

produces positive voltage at Pin 2, in accordance with industry convention.

Each of the elements in the microphone is shock mounted. The Line-cardioid polar

pattern of the elements provides a 90°angle of acceptance. The AT882TL is designed

with integral wind-screens to ensure maximum security against wind noise and

plosives.

The microphone is enclosed in a sturdy metal housing with a low-reflectance black

finish. Its base is a desk stand that connected with a 2 meter splitter cable, which

terminates in two 3-pin XLRM-type connectors, for in-house and remote feeds.

The AT882TL is intended for use on a flat surface. The 2 meter splitter cable terminates

in two 3-pin XLRM-type connectors, which can be connected to in-house and/

or remote feeds. Connect the red output (Channel A) to the primary in-house feed.

Connect the gray output (Channel B) to the remote feed.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed

43°C for extended periods. Extremely high humidity should also be avoided.

Features

• Designed for quality sound reinforcement in demanding situations, especially those

requiring separate miking for PA and broadcast.

• Dual-element Line-cardioid condenser microphone with two independent power

module.

• Circuit grounds for each channel are completely isolated, greatly reducing the

potential for hum.

• Integral windscreens ensure ultimate security against wind noise and plosives.

• Sturdy metal housing design with ball-in-socket base permits flexible positioning.

• Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to

the microphones.

Specifications

ElementDual back electret condenser

Polar patternLine-cardioid

(Unidirectional)

Frequency response20-20,000 Hz

Open circuit sensitivity-31 dB

(28.2 mV)

re 1V at 1 Pa

Impedance 100 ohms

Maximum input sound level126 dB SPL, 1 kHz at 1% T.H.D.

Signal-to-noise ratio>69 dB, 1 kHz at 1 Pa

Phantom power requirements11-52V DC, 2 mA typical

Weight 1.22 kg

Dimensions214 mm - long,

227 mm - Max. height,

102 mm - Width

Cable 2 m long, vinyl-jacketed stereo cable

Output connectorTwo 3-pin XLRM-type

polar pattern

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

10 dB

20k10k5k2k1k50020010050

LEGEND

frequency response

Frequency in Hertz

Response in dB

12” or more on axis

Audio-Technica Corp. Machida • Tokyo • Japan 2017 MARFORM No. ATGC-L0339-17-E

Optional Accessories:

AT8201 line matching transformer (Lo-z to

50,000 ohms)

AT8202 adjustable in-line attenuator for use

with low-impedance microphones.

AT8506 four-channel 48V phantom power

supply (AC powered).

Dual-element Line-cardioid Condenser Microphone

AT882TL

Produktspezifikationen