Audio-Technica ATM230 Bedienungsanleitung


Lies die bedienungsanleitung für Audio-Technica ATM230 (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Audio-Technica ATM230 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
ATM230
Hypercardioid Dynamic Instrument Microphone
FORM No. ATGC-L0333-16-E
Machida Tok yo Japan
polar pattern
330°
300°
270°
240°
210°
180°
150°
90°
60°
30°
8 kHz
200 Hz
1 kHz
5 kHz
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Specifications
Element Dynamic
Polar pattern Hypercardioid
Frequency response 30-12,000 Hz
Open circuit sensitivity -54 dB
(1.9 mV)
re 1V at 1 Pa
Impedance 600 ohms
Weight 292 g
Dimensions 82.5 mm - long,
38.0 mm - maximum diameter
Output connector Integral 3-pin XLRM-type
Accessories furnished AT8665 drum mount for 5/8"-27 threaded
adapter;
5/8"-27 to 3/8"-16 threaded adapter;
Soft protective pouch
Features
Tailoredtocapturesoundfromrackandfloortoms,snaredrumsand
otherpercussioninstruments
HandlesveryhighSPLatcloserange
Hypercardioidpolarpatternreducespickupofsoundsfromthesides
andrear,improvingisolationofdesiredsoundsource
Rareearthmagnetforimprovedoutputandtransientresponse
Low-profiledesignpermitsversatileplacementarounddrumkit
Rugged,all-metalconstructionensuresdependableperformancein
live-musicandstudioapplications
Integral5/8"-27threadedstandclampworkswithincludeddrum
mounttopermitmountingofmictodrumrim
Description
The ATM230 is a dynamic microphone with a hypercardioid polar pattern. It
is designed specically for musical instrument pickup in the studio and on
stage.
The hypercardioid polar pattern of the microphone is more sensitive to
sound originating directly in front of the element, making it useful for
controlling feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing and is outtted with an
integral 5/8"-27 threaded stand clamp. The included AT8665 drum mount
screws into the stand clamp to permit mounting of the ATM230 to the rim
of a drum. A soft protective pouch is also included.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2
and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”- positive acoustic
pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43° C for extended periods. Extremely high humidity
should also be avoided.
Take care to keep foreign particles from entering the windscreen. An
accumulation of iron or steel filings on the diaphragm, and/or foreign
material in the windscreen's mesh surface, can degrade performance.
FORM No. ATGC-L0333-16-C
Machida Tokyo Japan
超心形指向性动圈式乐器话筒
使
5/8"-27使便
ATM230
AT M 2 3 0 5 / 8 " - 2 7
AT 8 665
XLRM
2 3 1 线 ( )
2
线
1-12-23-3
4 3 ° C
湿
收音头
动圈式
指向特性
超心形指向性
频率响应
30-12,000 Hz
开通灵敏度
-54 dB
(1.9 mV)
1V 1 Pa
输出阻抗
600
(线)
292
外形尺寸
82. - , 38. - 5 mm 0 mm
输出连接器
XLRM-3
附属品
AT8665 5/8 -27 "
5/8 -273/8 -16" "
ATM230
330°
300°
270°
240°
210°
180°
150°
90°
60°
30°
8 kHz
200 Hz
1 kHz
5 kHz
声压曲线1刻度5 dB
频率
10 dB
20k10k5k2k1k50020010050
电平
频率 (赫兹)
响应电平 (dB)
平直


Produktspezifikationen

Marke: Audio-Technica
Kategorie: Mikrofon
Modell: ATM230

Brauchst du Hilfe?

Wenn Sie Hilfe mit Audio-Technica ATM230 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten