AXESS AX-TRIG1 Bedienungsanleitung


Lies die bedienungsanleitung für AXESS AX-TRIG1 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 8 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 4.5 Bewertungen. Hast du eine Frage zu AXESS AX-TRIG1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Installation Instructions for AX-TRIG1
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 8/8/16
REV. 8/8/16
axxessinterfaces.com metraonline.com
axxessinterfaces.com metraonline.com
Axxess Integrate
Axxess Integrate
Installation Instructions for AX-TRIG1
INTRODUCTION
The AX-TRIG1 emulates a parking brake signal for
use in RV’s, off road vehicles, and exhibition vehicles.
AX-TRIG1
All accessories, switches, climate controls panels, and especially air bag indicator lights
must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
Connections to be made
Wiring the AX-TRIG1:
1. Connect the wire to chassis ground.Black
2. Connect the wire to the aftermarket radios amplifier Blue/White
turn-on wire.
3. Connect the wire to the parking brake wire of the Green
aftermarket radio.
4. Connect the Yellow/Black wire to the foot brake wire of the
aftermarket radio (Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and
exhibition vehicles only. Other applications are illegal.
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most cognized and spected re re
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for mo information and take steps re
toward a better tomorrow.
Metra recommends MECP
certified technicians
AX-TRIG1
¡PRECAUCIÓN!
Todos los accesorios, interruptores, paneles de controles de clima y especialmente
las luces del indicador de las bolsas de aire deben estar conectados antes ciclar la ignición. Además, no
quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando.
Metra recomienda técnicos
con certificación del Programa
de Certificación en Electrónica
Móvil (Mobile Electronics
Certification Program, MECP).
EL CONOCIMIENTO ES PODER
Mejore sus habilidades de instalación y
fabricación inscribiéndose en la escuela de
dispositivos electrónicos móviles más reconocida
y respetada de nuestra industria. Regístrese en
www.installerinstitute.com o llame al
800-354-6782 para obtener más información y
avance hacia un futuro mejor.
INTRODUCCIÓN
El AX-TRIG1 emula una señal de freno de mano para su uso en
vehículos recreativos, vehículos todo terreno y vehículos de exposición.
Conexiones que se deben hacer
Cableado del AX-TRIG1:
1. Conecte el cable a la tierra del chasís.negro
2. Conecte el cable al amplificador de la radio del azul/blanco
mercado secundario cable de encendido.
3. Conecte el cable al cable del freno de estacionamientoverde
de la radio del mercado secundario.
4. Conecte el cable al cable del freno de pie de la amarillo/negro
radio del mercado secundario (lo Alpine).
¡Atención! Este producto está destinado a ser utilizado en vehículos
recreativos, vehículos todo terreno, y sólo los vehículos de exposición. Otras
aplicaciones son ilegales.


Produktspezifikationen

Marke: AXESS
Kategorie: Nicht kategorisiert
Modell: AX-TRIG1

Brauchst du Hilfe?

Wenn Sie Hilfe mit AXESS AX-TRIG1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten