AXESS 99-7510 Bedienungsanleitung


Lies die bedienungsanleitung für AXESS 99-7510 (16 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu AXESS 99-7510 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/16
METRA - The World’s best kits
®
metraonline.com
REV. 12/21/2016 INST99-7510
Installation instructions for part 99-7510
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
Two finishes available:
99-7510 = Black
99-7510HG = Gloss Black
A) Radio/climate control housing • B) ISO DIN brackets • C) ISO DIN trim plate • D) (4) Plastic panel clips
• E) Axxess Interface and wiring harness (not shown)
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS
Wiring Harness:Axxess interface and wiring harness included
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench • Cutting tool
TOOLS REQUIRED
Mazda RX-8 2004-2008
99-7510, 99-7510HG
A
B C
D
Dash Disassembly ................................................. 2
Kit Preparation ....................................................3-4
Kit Assembly
DIN radio provision with pocket ............................ 4
ISO DIN radio provision with pocket ...................... 5
Axxess Interface Installation .............................5-7
Display Customization ........................................7-8
Table of Contents
99-7510
®
1. Unscrew the shift knob counter
clockwise to remove. (Figure A)
2. Unclip and remove the shifter trim
panel. (Figure B)
3. Remove (2) Phillips screws
from the bottom of the ashtray
assembly, then unclip and remove.
(Figure C)
Dash Disassembly
FM1 877
AC
FM1 877
AC
FM1 877
AC
FM1 877
AC
FM1 877
AC
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
2
4. Unclip and remove the knee panel
on the driver’s side under the
steering column (Figure D)
5. Remove (1) 10mm bolt securing
the side of the radio. (Figure E)
6. Remove (2) Phillips screws from
the bottom of the radio/climate
control panel, then unsnap and
remove. (Figure F)
Continue to Kit Preparation


Produktspezifikationen

Marke: AXESS
Kategorie: Nicht kategorisiert
Modell: 99-7510

Brauchst du Hilfe?

Wenn Sie Hilfe mit AXESS 99-7510 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten