AXESS AXLOC-FD1 Bedienungsanleitung

AXESS Nicht kategorisiert AXLOC-FD1

Lies die bedienungsanleitung für AXESS AXLOC-FD1 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu AXESS AXLOC-FD1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/8

AXLOC-FD1

I N S T A L L A T I O N I N S T R U C T I O N S

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

TABLE OF CONTENTS

Applications.............................................................1

Installation ............................................................. 2

Diagram .................................................................. 3

APPLICATIONS

Ford

Crown Victoria 2003-2011

E-Series 2014-2019

Econoline 2009-2013

Edge 2007-2010

Escape 2008-2012

Expedition 2003-2015

Explorer 2006-2010

F-150 2004-2014

F250/350/450/550 2005-2016

F650/750 2011-2019

Five Hundred 2005-2007

Flex 2009-2012

Focus 2005-2011

Freestar 2004-2007

Freestyle 2005-2007

Fusion 2006-2012

Mustang 2004-2014

Taurus 2008-2012

Thunderbird 2004-2005

Transit Connect 2010-2013

Lincoln

LS 2003-2006

MKX 2007-2010

MKZ 2007-2009

Navigator 2003-2006

Town Car 2003-2011

Zephyr 2006 only

Mazda

Tribute 2008-2011

Mercury

Grand Marquis 2003-2011

Mariner 2005-2011

Milan 2006-2011

Montego 2005-2007

Monterey 2004-2007

Mountaineer 2006-2010

Sable 2008-2009

KIT COMPONENTS

• AXLOC-FD1 Wiring Harness

• Gain Controller

• 12v-500mA Remote Wire

• Auxiliary Cable

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle speciﬁc applications.

• Designed to provide (2) channels of low-level audio output from the factory system.

• Allows for the installation of an ampliﬁer for speakers or subwoofers.

• Gain Controller included to adjust the overall output.

• 12v-500mA remote wire activated with signal sense.

• 55-watts per channel.

• Designed for non-ampliﬁed vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple ampliﬁers.

Ford LOC (Line Output Converter)

AXLOC-FD1

(for Non-Ampliﬁed Vehicles)

2003-2019

For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the for .Vehicle Fit Guide Radio Install Kits