blafili XLR Bedienungsanleitung

Lies die bedienungsanleitung für blafili XLR (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu blafili XLR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Bluetooth Audio Receiver for Mixers & Active PA/DJ Systems

Features:

XLR output Bluetooth audio receiver for mixers and active PA speakers

Connects smartphones & laptop to audio broadcast systems via Bluetooth to amplify music or

other audio

One blafili XLR Bluetooth audio receiver for mono audio

Two blafili XLR units can be linked in order to receive a stereo signal

Internal rechargeable battery provides 10 hours of operation

USB Type-C port for charging via any 5V USB power source

Stable connectivity over a 32.8 ft range (line-of-sight without obstacles). Gives you ample coverage

for parties, events and weddings

Support to connect any computer as a USB sound card

Note: blafili XLR may not be fully charged upon purchase. While it is safe to use it right away, charging for 2 hours

before initial use will ensure a full charge and the best performance.

Specifications:

Bluetooth profiles: 5.1, A2DP, AVRCP

Supported Bluetooth Codecs: SBC,

AAC, aptX, aptX LL, aptX HD

Balanced Audio Output: XLR male

Audio Inputs: Bluetooth and USB-C

XLR Output level: 1.23V RMS

Bluetooth range: Up to 32.8 feet (10 m)

Frequency band: 2402 to 2480MHz

USB charging: Type-C 5V, 500mA

USB-C Charging Port

/Audio Input

PAIR LED Status:

Flash blue and red alternately:

in pairing mode

Cyan = aptX

Green = aptX HD

Blue = SBC

Pink = AAC

TWS LED Status:

Solid blue: successful TWS connection

Flashing blue: TWS connecting

Turn ON / OFF TWS: Hold the “TWS”

button for about 3s to force the device to

enter / exit the TWS pairing mode (Turn

ON blafili XLR First)

Reconnect: short press “TWS” when out

of connection

CHG LED Status:

Solid red: charging

Off: fully charged

Red LED flashes 5 times every minute:

battery low needs to recharged again

PAIR LED

PAIR,

Power ON/OFF button

TWS LED

TWS button

Battery Status LED

XLR Output

Rechargeable battery: Built-in lithium-ion 320mAh

Battery life: Up to 10 hours

Recharging time: Up to 2 hours

A2DP frequency response: 20 Hz - 20 kHz (ref 1

kHz, ± 3 dB)

USB DAC resolution: 16-bit / 48 kHz

Dimensions: 117 x 30 x 25 mm

Weight: 0.09 lbs / 40 g

Controls:

Turn blafili XLR ON / OFF: Hold the

“PAIR” button for about 3s to Turn ON /

OFF the device

Play / Pause: short press “PAIR” when

playing music

Reconnect: short press “PAIR” when

out of connection

White = aptX LL

Produktspezifikationen