Bogen CA11A Bedienungsanleitung

Lies die bedienungsanleitung für Bogen CA11A (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7 Bewertungen. Hast du eine Frage zu Bogen CA11A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CA10A Call Switch

Model CA0A is a 2-position room switch designed for use1

with SBA-Series room selector panels.When the switch is

pressed,the annunciator lamp on the SBA-Series switchbank

illuminates,designating the calling station.When the switch is

released,the lamp remains illuminated until the call is

answered.

The switch is designed for flush mounting in a standard single-

gang outlet box.Refer to Figure 1below and wire the switch

as follows:

1.Connect the unshielded wire from the corresponding

annunciator terminal on the room selector panel to the red

wire of the CA0A switch.1

2.Connect the black wire to the speaker ground (shield of

speaker line).

CA11A Call Switch

Model CAA is a 3-position switch providing annunciator call11

and privacy control.The switch has two fixed positions,TALK

and PRIVACY.In the TALK position,the remote station has

normal,non-private operation.In the PRIVACYposition,the

remote station cannot be monitored from the main console.

The CAA also has a momentary PRESSTOCALL position.11

When the switch is pressed,the annunciator lamp on the SBA-

Series room selector panel illuminates,designating the calling

station.When the switch is released,the lamp remains illumi-

nated until the call is answered.

The switch is designed for flush mounting in a standard single-

gang outlet box.Refer to Figure 2 below and wire the switch

as follows:

1.Connect the unshielded wire from the corresponding

annunciator terminal on the room selector panel to the red

wire of the CAA switch.11

2.Connect the white wire to the center tap of the room

speaker line-matching transformer.This connection may be

made via the speaker cable shield,as shown in Figure 2.

3.Connect the black wire to the audio system ground at the

shield of the audio cable from the console,as shown in

Figure 2.

-

-

-

-

-

-

CALLSWITCHESModels CA10A & CA11A

Figure 1- Model CA10A Connecting Diagram

Figure 2 - Model CAA Connecting Diagram11

www.bogen.com

©20Bogen Communication22 s LLC

54-5972-01 C030722

Specifications subject to change without notice.

Produktspezifikationen