Brighter ATOM S Bedienungsanleitung
Brighter
Beleuchtung
ATOM S
Lies die bedienungsanleitung für Brighter ATOM S (15 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 2 Bewertungen. Hast du eine Frage zu Brighter ATOM S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15
BRIGHTER LIGHTING SP Z.O. . O.
ul. Warszawska 111
32- Bibice087
POLAND
NIP: 9442248196
REGON: 361197164
Page 1of 15
USER MANUAL
ATOM S
USER MANUAL
This product manual contains important information about the safe installation and use of this projector.
Please read and follow these instructions carefully and keep this manual in a safe place for future
reference.
Please read the instructions carefully before use!
BRIGHTER LIGHTING SP Z.O. . O.
ul. Warszawska 111
32- Bibice 087
POLAND
NIP: 9442248196
REGON: 361197164
Page 2of 15
1. SAFETY PRECAUTIONS
This fixture is a sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important
to follow all instructions and guidelines in this manual. Manufacturer is not responsible for injuries and damages
resulting from the misuse of this fixture due to the disregard of the information printed in this manual. Only
qualified or certified personnel should perform installation of this fixture and only the original rigging parts
included with this fixture should be used for installation. Any modifications to the fixture and the included
mounting hardware will void the original manufacturer’s warranty and increase the risk of damage personal
injury.
▪ PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED
▪ THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT.DO NOT ATTEMPT ANY REPAIRS YOURSELF,AS
DOING SO WILL VOID YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM
MODIFICATIONS TO THIS FIXTURE AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES IN
THIS MANUAL VOID THE MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY
CLAIMS AND/OR REPAIRS
▪ DO NOT PLUG FIXTURE INTO A DIMMER PACK
▪ NEVER OPEN THIS FIXTURE WHILE IN USE
▪ UNPLUG POWER BEFORE SERVICING FIXTURE
▪ NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT! KEEP FLAMMABLE MATERIALS AWAY
FROM FIXTURE
▪ NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE
▪ RETINA INJURY RISK - MAY INDUCE BLINDNESS
▪ SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK
▪ ENSURE THAT ALL CONNECTIONS AND END CAPS ARE PROPERLY SEALED WITH A DIELECTRIC GREASE
(AVAILABLE AT MOST ELECTRICAL SUPPLIERS) TO PREVENT WATER CORROSION AND/OR ELECTRICAL
SHORT CIRCUIT
▪ KEEP APPROPRIATE DISTANCE FROM OBJECTS/SURFACES 1 METER (3.3 FEET)
▪ MAXIMUM TEMP OF EXTERNAL SURFACE 185° F (85°C)
▪ MINIMUM DISTANCE OF FLAMMABLE MATERIALS FROM THE SURFACE IS 1.6 FEET (0 .5 METER)
▪ DO NOT TOUCH THE FIXTURE HOUSING DURNING OPERATION. TURN OFF THE POWER AND ALLOW
APPROXIMATELY 15 MINUTES FOR THE FIXTURE TO COOL DOWN BEFORE SERVICING
▪ DO NOT SHAKE FIXTURE , AND AVOID BRUTE FORCE WHEN INSTALLING OPERATING
BRIGHTER LIGHTING SP Z.O. . O.
ul. Warszawska 111
32- Bibice 087
POLAND
NIP: 9442248196
REGON: 361197164
Page 3of 15
▪ DO NOT operate fixture if the power cord is frayed, crimped, damaged or if any of the power cord
connectors are damaged and do not insert into the fixture securely with ease
▪ NEVER force a power cord connector into the fixture. If the power cord or any of its connectors are
damaged, replace it immediately with a new one of the same power rating
▪ DO NOT block any air ventilation slots
▪ All fan and air inlets must remain clean and never blocked
▪ Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling
▪ Always disconnect fixture from main power source before performing any type of service or cleaning
procedure
▪ Only handle the power cord by the plug end. Never pull out the plug by tugging the wire portion of
the cord
▪ During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture.
This is a normal process and is caused by excess paint in the interior of the casing burning off from the
heat associated with the lamp and will decrease gradually over time
▪ Consistent operational breaks will ensure fixture will function properly for many years
▪ ONLY use the original packaging and materials to transport the fixture in for service
2. MAINTENANCE GUIDELINES
DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!
2.1. CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and an extended life.
The frequency of cleaning depends on the environment in which the fixture operates: damp, smoky or
particularly dirty environments can cause greater accumulation of dirt on the fixture’s optics. Periodically
clean the external lens surface with a soft cloth to avoid dirt/debris accumulation. NEVER use alcohol,
solvents, or ammonia-based cleaners .
Produktspezifikationen
| Marke: | Brighter |
| Kategorie: | Beleuchtung |
| Modell: | ATOM S |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Brighter ATOM S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Brighter
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
Bedienungsanleitung Beleuchtung
- ILive
- Silva
- Kichler
- Godox
- Party Light & Sound
- Craftsman
- DataVideo
- Kanlux
- Rockville
- EtiamPro
- DIO
- InnovaGoods
- IKEA
- Elight
- FeinTech
Neueste Bedienungsanleitung für -Kategorien-
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025
24 Juli 2025