CDN TM8 Bedienungsanleitung


Lies die bedienungsanleitung für CDN TM8 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu CDN TM8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Features
Dual function
Memory
Counts up & down
Clock
Stopwatch
Loud and long alarm
Stop and restart
Lock
Food-safe ABS plastic
Sliding mode switch
International time
3-way mounting: pocket clip/magnet/stand
Battery and instructions included
Note: Remove sticker from display before use.
Note: In the following instructions, names of the control
buttons are shown in CAPS. Function information that appears
on the display is shown in .BOLD CAPS
Battery Installation
Replace battery when LCD becomes dim or alarm
level declines.
1. Remove battery cover on the back by sliding it
in the direction of the arrow.
2. Install one LR44 battery, positive (+) side up.
A brief alarm sounds.
3. Replace the battery cover until it clicks shut.
Operating Instructions
A. Set Clock
1. Slide switch on the right side to CLOCK to
select clock mode. or appears on the AM PM
display in 12-hour time.
2. Press and hold the CLEAR button for 2 seconds
to switch between 12-hour, AM/PM time, and
24-hour, international time.
3. Press the HR MIN and/or SEC buttons
to enter the desired time. Press and hold for
fast advance.
B. Count Down
1. Slide switch on the right side to TIMER to
select the count down mode. appears TIMER
on the display.
2. Press the HR MIN and/or SEC buttons
to enter the desired time. Press and hold for
fast advance.
Note: The timer retains any time showing on the display
when the sliding mode switch is moved to another
position.
3. Press the MEMORY button to enter the set time
into memory. MEMORY appears on the display.
a. Press the MEMORY button to recall
the set time.
b. Press the MEMORY button, then press
the CLEAR button, to clear the set time
from memory.
4. Press the START/STOP button to start
counting down.
Note: ashes on the display during count down TIMER
when in other modes.
5. Press the START/STOP button to interrupt
the count. Press START/STOP again to resume
the count.
6. The alarm sounds and ashes TIME’S UP
on the display when the count reaches
0:0000. The timer counts up the overtime
since reaching . The maximum overtime 0:0000
is 10 hours.
7. The alarm and ashing stop automatically after
60 seconds while the count up continues.
Press START/STOP to stop the alarm and the
count up, and reset to .0:0000
8. Press CLEAR when timer is stopped to reset
to .0:0000
Model: TM8
Multi-Task Timer & Clock
Counts 24 hours by minutes & seconds


Produktspezifikationen

Marke: CDN
Kategorie: Nicht kategorisiert
Modell: TM8

Brauchst du Hilfe?

Wenn Sie Hilfe mit CDN TM8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten