Choice 407ONSLIC14 Bedienungsanleitung
Choice
Schneidemaschine
407ONSLIC14
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Choice 407ONSLIC14 (3 Seiten) in der Kategorie Schneidemaschine. Dieser Bedienungsanleitung war fĂŒr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 3.5 Sternen bewertet
Seite 1/3
User Manual
Item # 407ONSLIC14
1/4â
Item # 407ONSLIC316
3/16â
07/2020
Onion Slicers
Safety Instructions
Be careful when handling and operating the machine, as the blades are very sharp. Always keep
your hands away from the blades. When not in use, use the ring pin to secure the machine in the
lockdown position.
Operation
1) Remove ring pin from lockdown position hole and place in the hole on the handle.
2) Use the handle to raise the push plate to the upright position.
3) Carefully place produce on the blade surface. Make sure the produce isnât larger than the
blade surface.
a. Note: For proper functionality and slice size make sure the two appropriate blade
cartridges are set on top of one another.
4)î Makeîsureîhandsîandîîngersîareîclearîofîtheîcuttingîarea.
5)î Withîoneîîrm,îswiftîmotionîbringîtheîhandleîdownîuntilîtheîpushîplateîpushesîtheî
produce completely through the blade cartridges.
Cleaning and Maintenance
1) To remove pusher assembly remove the ring pin and use the handle to lift the pusher
assembly off of the guide rods.
2) Carefully remove blade assemblies from the main frame one at a time.
3) Thoroughly clean the frame, blade assemblies, and pusher assembly.
4) Dry all components then replace the blade assemblies, pusher assembly, and ring pin.
5) If necessary lubricate the guide rods with food grade mineral oil. Do NOT use cooking or
vegetable oil.
Please read and comply with the instructions listed on this document. To get the best
service life and performance from your machine, clean it thoroughly before and after each
use by following the instructions listed below. Minimize the use of alkaline cleaners as
theyîmayîdullîtheîînishîandîcauseîpitting.î
User Manual
Onion Slicers
Replacement Parts
User Manual
Onion Slicers
3/16â Blade Set
#407ONBLD316
1/4â Blade Set
#407ONBLD14
1/4â Pusher Plate
#407ONPUSH14
3/16â Pusher Plate
#407ONPUSH316
Non-Skid Foot
#407NSKIDFEET
Bumper
#181BUMPER2
Chain and Pin
Assembly
#181CHAINPIN
Bushing
#181BUSHING2
Produktspezifikationen
| Marke: | Choice |
| Kategorie: | Schneidemaschine |
| Modell: | 407ONSLIC14 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Choice 407ONSLIC14 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Choice
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
Bedienungsanleitung Schneidemaschine
- Schneidemaschine Sunbeam
- Schneidemaschine Skil
- Schneidemaschine Westfalia
- Schneidemaschine Kinzo
- Schneidemaschine Hyundai
- Schneidemaschine Gorenje
- Schneidemaschine Powerplus
- Schneidemaschine Heinner
- Schneidemaschine Enkho
- Schneidemaschine Hobart
- Schneidemaschine Wolfcraft
- Schneidemaschine Berkel
- Schneidemaschine Ufesa
- Schneidemaschine Graef
- Schneidemaschine Clatronic
Neueste Bedienungsanleitung fĂŒr -Kategorien-
4 Juni 2025
25 November 2024
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Princess Classic Multi Food Slicer 492977 Bedienungsanleitung
10 Oktober 2024
9 Oktober 2024
6 Oktober 2024
5 Oktober 2024