Cisco AIR-AP2702I-UX-WLC Bedienungsanleitung
Cisco
Zugangspunkt
AIR-AP2702I-UX-WLC
Lies die bedienungsanleitung für Cisco AIR-AP2702I-UX-WLC (44 Seiten) kostenlos online; sie gehört zur Kategorie Zugangspunkt. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 15 Bewertungen. Hast du eine Frage zu Cisco AIR-AP2702I-UX-WLC oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/44

G ETTING S GTARTED UIDE
Cisco Aironet 2700 Series Access Points
1About this Guide
2Introduction to the Access Point
3Safety Instructions
4Unpacking
5Configurations
6Access Point Ports and Connectors
7Configuring the Access Point
8Mounting the Access Point
9Deploying the Access Point on the Wireless Network
10 Troubleshooting
11 Declarations of Conformity and Regulatory Information
12 Configuring DHCP Option 43 and DHCP Option 60
13 Access Point Specifications

2
OL-31386-01
Last Updated: September 8, 2015

3
1 About this Guide
This Guide provides instructions on how to install and configure your Cisco Aironet 2700 Series
Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.
The 2700 Series Access Point is referred to as the in this document.access point
2 Introduction to the Access Point
The 2700 series supports high-performing Spectrum Intelligence which sustains three spatial stream
rates over a deployable distance with high reliability when serving clients. The 2700 series provides
high reliability and overall wireless performance.
The 2700 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna
options. The access points support full interoperability with leading 802.11ac clients, and support a
mixed deployment with other access points and controllers.
The 2700 series access point is a controller-based (Unified) product and supports:
•Simultaneous dual-band (2.4-GHz and 5-GHz) radios
•Integrated antennas on the 2702I access point model (AIR-CAP2702I-x-K9, AIR-AP2702I-UXK9)
•External antennas for rugged 2702E access point model (AIR-CAP2702E-x-K9,
AIR-AP2702I-UXK9)
Note The ‘x’ in the model numbers represents the regulatory domain. Model numbers
containing -UX, support the universal regulatory domain. For information on supported
regulatory domains, see “Regulatory Domains” section on page 7.
The features of the 2700 series are:
•Processing sub-systems (including CPUs and memory) and radio hardware which supports:
–
Network management
–
CleanAir—Automatic detection, classification, location and mitigation of RF interference
–
ClientLink 3.0—BeamForming to 802.11n/ac clients and legacy 802.11a/g OFDM clients.
–
VideoStream
–
Location
–
WIDS/WIPS
–
Security
–
Radio Resource Management (RRM)
–
Rogue detection
Produktspezifikationen
Marke: | Cisco |
Kategorie: | Zugangspunkt |
Modell: | AIR-AP2702I-UX-WLC |
Breite: | 221 mm |
Tiefe: | 221 mm |
Gewicht: | 1000 g |
AC-Netzadapter: | Ja |
Produktfarbe: | Weiß |
Höhe: | 51 mm |
Platzierung: | Zimmerdecke |
AC Eingangsspannung: | 100 - 240 V |
AC Eingangsfrequenz: | 50 - 60 Hz |
Gleichstrom-Anschluss (DC): | Ja |
Betriebstemperatur: | 0 - 40 °C |
Relative Luftfeuchtigkeit in Betrieb: | 10 - 90 % |
Netzstandard: | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3at |
Unterstützte Sicherheitsalgorithmen: | 802.1x RADIUS, AES, EAP, EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, TKIP, WPA, WPA2 |
Zertifizierung: | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1, EN 50155, FCC, RSS-210, EN 300.328, EN 301.893, ARIB-STD 66, ARIB-STD T71, EMI, ICES-003, VCCI, EN 301.489-1, EN 60601-1-2 EM |
Stromverbrauch (Standardbetrieb): | 15 W |
Power over Ethernet (PoE): | Ja |
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): | 3 |
Maximale Datenübertragungsrate: | 1300 Mbit/s |
Ethernet LAN Datentransferraten: | 10,100,1000 Mbit/s |
2,4 GHz: | Ja |
Zahl der Benutzer: | - Benutzer |
Anzahl Kanäle: | 21 Kanäle |
WAN Port: | Ethernet (RJ-45) |
Antenne Zunahmeniveau (max): | 6 dBi |
Anzahl der Antennen: | 2 |
LED-Anzeigen: | Ja |
Temperaturbereich bei Lagerung: | -30 - 70 °C |
Frequenzband: | 2.4, 5 GHz |
Speicherkapazität: | 512 MB |
5 GHz: | Ja |
Übermittlungsleistung: | 23 dBmW |
WLAN-Multimedia (WMM)/(WME): | Ja |
Antennenfunktionen: | Integrierte Antenne |
Flash-Speicher: | 64 MB |
Wi-Fi Datenrate (max): | 1300 Mbit/s |
Höhe bei Betrieb: | 0 - 3000 m |
Antennenrichtungsart: | Mit kugelförmiger Richtcharakteristik |
Höhe bei Lagerung: | 0 - 4572 m |
Kanalabstand: | 80 MHz |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cisco AIR-AP2702I-UX-WLC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zugangspunkt Cisco
14 Juni 2025
11 Oktober 2024
8 Oktober 2024
4 Oktober 2024
19 September 2024
12 August 2024
9 August 2024
9 August 2024
7 August 2024
5 August 2024
Bedienungsanleitung Zugangspunkt
- EQ3
- Black Box
- TRENDnet
- Intellinet
- Linksys
- StarTech.com
- Luxul
- AMX
- HP
- Aruba
- Dell
- Cudy
- Edimax
- Huawei
- Advantech
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
7 Juni 2025
6 Juni 2025
31 Mai 2025
2 Dezember 2024
13 Oktober 2024