Cotech V-9688 Bedienungsanleitung
Lies die bedienungsanleitung für Cotech V-9688 (5 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 14.5 Bewertungen. Hast du eine Frage zu Cotech V-9688 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
English
GREAT BRITAIN
customer service tel: 020 8247 9300 customerservice@clasohlson.co.uke-mail:
internet: www.clasohlson.co.uk
Ver. 20150210
Battery status:
Bad, Full,
Discharge or
Charge
Capacity indicator for
9 V batteries (2 ×)
USB status Capacity indicator for R03, R6, R14
and R20 batteries (4 ×)
Battery Charger
Art.no. 18-5105 Model V-9688-UK
36-5105 V-9688
Please read theentire instruction manual before use and save it for future reference. Wereserve theright for any errors in text or images and for making any necessary
technical changes to this document. Ifyou should have any questions concerning technical problems please contact our Customer Services.
Discharging
Discharging removes thememory effect from thebatteries whichare
not fully discharged and result in adiminished charging capacity.
1. Connect theadaptor to apower point and theDC plug to thecharger.
2. Insert 1 to 4 batteries (R03, R6, R14 or R20) according to thepolarity
markings on thecharger. Pressthem securely against thebottom.
(9 V batteries (6F22) cannot be discharged).
3. Press thedischarge button on left side of thedisplay.
4. “DISCHARGE” is shown and theblue background lightis
illuminated as long as discharging is in progress.
5. Thebattery icons flash as long as discharging isin
progress for any of thebatteries.
6. Charging starts automatically when thebatteries are discharged.
USB connection
1. TheUSB connection can only be used when thebatteries
in charger are fully charged or if thecharge isempty.
2. TheUSB symbol will be lit when thecharger’s USB
connection is ready touse.
3. Connect theUSB device to be charged to theUSB
outlet on theback of thecharger.
Note: Powerconsumption cannot exceed 500 mA (5 V).
Disposal
Sort and recycle products where possible, instead of disposing
ofthem. Allelectronic products, batteries and packaging material
etc. should be sorted and processed according tolocal
environmental regulations.
Specifications
Operating voltage
Input Power 100–240 V AC, 50/60 Hz
Output Power 12 V DC, 1000 mA (centre positive)
Using theAC/DC adaptor: DC12 V 1000 mA
Charging Current Ni-MH capacity Charging time
R03: 500 mA R03 1000 mAh 2 hours
R6: 1300 mA R6 2500 mAh 2 hours
R14: 1300 mA R14 2800 mAh 2.25 hours
R14 4500 mAh 4 hours
R20: 1300 mA R20 2800 mAh 2.25 hours
R20 9000 mAh 7.5 hours
Discharge current 400 mA for R03, R6, R14 and R20
Detection method -ΔV auto cut-off for R03, R6, R14, and
R20 batteries
Charging current 9 V
Charge time 9 V
30mA
10 hours (timer controlled)
Compatible batteries R03 500–1100mAh
R6 1300–2700mAh
R14 1300–4500mAh
R20 1300–10000mAh
9 V (6F22) 100–250 mAh
Note: Thecharging time can vary depending on thecapacity and condition
of thebattery.
Discharge button LCD display Backlight
Safety
• Only charge rechargeable NiMH/Ni-CD batteries;
sizes R03, R6, R14, R20 or 6F22 (9 V).
• NEVER try to recharge regular dry-cell batteries, alkaline batteries or non-
rechargeable batteries in thebattery charger.
• Never use ahigher charging current than that whichis recommended or
that is marked on thebattery.
• Always charge rechargeable batteries before using them for thefirst time
and top them up again every secondmonth.
• Observe thebattery polarity markings on thecharger.
• Do not expose thecharger to water or sources of excessheat.
• Do not use thecharger if theconnection cableor power adaptor is damaged.
• Thecharger is only intended for indooruse.
• Thebatteries will become warm when charged, be careful when
removingthem.
• Only use theenclosed adaptor to power thecharger.
• Unplug theadaptor from thepower point when thecharger is not inuse.
Functions
• Used for quick charging Ni-MH batteries.
• Chargese.g. R201200 mAh in two hours and 15min, and 9000 mAh in
9hours.
• Compatible batterysizes: R03, R6, R14, R20 and 6F22 (9 V)
(6F22 (9 V) Timer-charged only).
• Microprocessor controlled charging.
• Negative delta-V cut off function (-ΔV).
• Timer protects against overcharging.
• Protected against short circuiting.
• Reverse-polarity protected.
• Bad battery indicator.
• Outlet for charging devices with aUSB connection (5 V, 500 mA).
• Do not let children use thecharger without supervision. Itis not atoy.
Contents
• Charger V-9688
• 230 V adaptor
• Instruction manual
Charging
1. Connect theadaptor to apower point and theDC plug to thecharger.
2. Insert 1 to 4 batteries (R03, R6, R14 or R20) according to thepolarity
markings on thecharger. Pressthem securely against thebottom.
9 V batteries (6F22) can be charged one or two at atime.
3. Thecharger determines thecorrect charge automatically.
Thedisplay’s icons graphically demonstrate thecharging process.
4. “CHARGE” is displayed when any battery is being charged.
Thedisplay will also illuminate as long as charging is in progress.
5. When all batteries are charged “FULL” will be displayed.
6. Disconnect theadaptor from thesocket and remove thebatteries when
charging is finished.
Incorrect batteries
Battery status: Whencharging commences thecharger makes sure that all
thebatteries are capable of being recharged and that none of them is inserted
incorrectly. Ifany of thebatteries cannot be charged or are misaligned, “BAD”
will be shown and theicon for thecorresponding battery willflash. Charging is
interrupted until thefault has been corrected (i.e. thedefective battery has been
removed or realigned).
Produktspezifikationen
| Marke: | Cotech |
| Kategorie: | Ladegerät |
| Modell: | V-9688 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Cotech V-9688 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ladegerät Cotech
4 August 2024
2 August 2024
30 Juli 2024
23 Juli 2024
20 Juli 2024
Bedienungsanleitung Ladegerät
- Ansmann
- Olight
- Telwin
- VARO
- Calima
- MIDAC
- V2C
- Litheli Tool
- Venom
- Oregon Scientific
- Aluratek
- Perel
- DCU
- Schwaiger
- Panduit
Neueste Bedienungsanleitung für -Kategorien-
20 Januar 2026
11 Januar 2026
10 Januar 2026
10 Januar 2026
6 Januar 2026
4 Januar 2026
4 Januar 2026
2 Januar 2026
30 Dezember 2026
30 Dezember 2026