CRUX MRVLR-68Q Bedienungsanleitung


Lies die bedienungsanleitung für CRUX MRVLR-68Q (9 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 7 Bewertungen. Hast du eine Frage zu CRUX MRVLR-68Q oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/9
- Rear-view camera input.
- Front-view camera input.
- Front-view camera and AV Inputs can sll be used even if vehicle is equipped with an
OEM rear view camera.
- Provides an HMDI Input for Navigaon or Wi-Fi Mirroring (Crux Part#: WVI-X, sold
separately).
- Add one Composite AV input.
- With OE type Dynamic Parking Guidelines.
- Toggle AV inputs from OE radio buons, wireless remote control or wired push buon
switch provided.
- -screen display and setup.On
- Compable with and 10.2 monitor.8”
MRVLR-68Q Module
Power/CAN Harness
(to Vehicle)
Power/Can Harness
(to Module)
Mul Cable
Remote Control
LVDS Cable
Power/CAN Harness
(for hardwired use only)
A/V Cable
Push Buon Switch
IR Cable
Camera Power Cable
RGB Cable
rev.031918
1 / 9
rev.031918
2 / 9
Please make sure to disconnect the power cable of the interface before changing the DIP
switch sengs.
KEY
FUNCTION
Power & PIP
Not Used
Menu
Acvate Factory Menu
Enter
Make a Selecon / Change the Image Display
Move UP
Move DOWN
Move LEFT (Press for 2 seconds to Access Factory Mode)
Move RIGHT (Press for 2 seconds to Reset User Data)
Connect the PURPLE wire, labeled SAFE , found on the Mul Cable ound in order to enter “ ” to Gr
the OSD Menu.
FUNCTION
DIP Switch Seng
RGB
OFF: RGB Mode Display / ON: Skip RGB
HDMI
OFF: Display HDMI / Skip HDMI
AV1
OFF: AV1 Mode Display / ON: Skip AVI
AV2
OFF: AV2 Mode Display / ON: Skip AV2
Monitor Size
OFF: 10.2” Monitor 8” Monitor / ON:
NOT USED
Rear Camera Mode
OFF: OEM Rear Camera / ON: Aermarket Rear Camera
CAN Seng
OFF: Jaguar XE, XF, F-PACE (CAN1)
ON: Discovery (CAN1)
If “OFF” seng fails to display the rear camera or PAS,
change the car model to “TYPE 2” on factory mode
ADJUST A CURRENT SCREEN POSITION AND SIZE
H-POSITION: Move display horizontally
V-POSITION: Move display vercally
BRIGHTNESS: Adjust brightness of screen
CONTRAST: Adjust contrast of screen
ADJUST REAR VIEW CAMERA SETTINGS
PAS TYPE: Select type of parking guide line
- NOT USED: No parking guide line
- PAS ON: Selecng Dynamic parking guide line
- PASS OFF: Select stac parking guide line
rev.031918
3 / 9


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: MRVLR-68Q

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX MRVLR-68Q benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten