CRUX RVCAD-81B Bedienungsanleitung


Lies die bedienungsanleitung für CRUX RVCAD-81B (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu CRUX RVCAD-81B oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/10
- Acvates Reverse camera input in Non MMI Audi vehicles.
- Rear-view camera input.
- Provides three AV Inputs.
- With OE type Dynamic Parking Assistance + PDC.
- -screen display and setup. On
AUDI
2008 - 2014
A4
2008 - 2014
A6
2008 - 2014
Q5
- Works on Audi vehicles with Non MMI systems (no MMI Control Knob behind the gear shier).
1 / 10
rev.0119 17
Connecng the CAN Wires
Connect CAN-H- (Brown+Green-3Pin) of the interface to CAN High (Orange + Brown) of the car HS
Connect CAN-L- (Green-4pin) of the interface to CAN Low (Orange + Green) of the carHS
2 / 10
rev.011917
Connection of LCD Wires
1. Unplug the OE LCD cable from a monitor and connect to the supplied LVDS-IN cable.
Please refer to the photo above The ACC wire should be at the bottom (see arrow) . WARNING: .
2. Connect the other end the original LVDS IN cable to LVDS IN port of the interface. of
3. Connect the supplied LVDS-OUT cable to OEM Monitor and connect the other end to the LVDS OUT
port of the interface.
3 / 10
rev.011917


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: RVCAD-81B

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX RVCAD-81B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten