CRUX SWRTY-61S Bedienungsanleitung

Lies die bedienungsanleitung für CRUX SWRTY-61S (40 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 11 Bewertungen. Hast du eine Frage zu CRUX SWRTY-61S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.020320

SWRTY-61S

Radio Replacement with Steering Wheel Retention for

Select Toyota Vehicles 2003 - Up

1 of 2

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- iPhone Voice Recognition (VR) feature from SWC on select radios.

- Supports BT-HF/A2DP/AVRCP prole on select aftermarket radio models.

- Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.

- Retains factory Aux Input.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

PARTS INCLUDED:

INSTALLATION DIAGRAM:

SWRTY-61S MODULESWRTY-61S HARNESSSWC CABLE

AFTERMARKET

RADIO

SWRTY-61S SWC

MODULE

+12V Constant Yellow

+12V ACC Red

Ground Black

Illumination Orange

Amp Turn-On Blue/ White

Power Antenna Blue

Right Front (+) Gray

Right Front (-) Gray/Black

Left Front (+) White

Left Front (-) White/Black

Right Rear (+) Violet

Right Rear (-) Violet/Black

Left Rear (+) Green

Left Rear (-) Green/Black

Audio Input Red/White RCA

(Retains Factory AUX Input

in Select 2007-Up Vehicles)

TO FACTORY

HARNESS

12-Pin Black

Connector

20 PIN

10 PIN

6 PIN

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

3.5MM SWC CABLE

Plug in the 3.5MM SWC cable to the 4-pin port

on the module. See “DIP SWITCH SETTINGS” section.

AFTERMARKET

RADIO SELECTOR

(See Chart)

TOYOTA

SWC SETTING

(OFF ON OFF ON)

ON RADIOVEHICLE

1 2 3 4 5 6 7 8

4-Pin

Connector

Cap or insulate if

not being used

Kenwood/JVC (BLUE / YELLOW)

Insulate with tape

if not being used

To aftermarket

radio SWC port

Produktspezifikationen