CRUX VIMCF-93 Bedienungsanleitung


Lies die bedienungsanleitung für CRUX VIMCF-93 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu CRUX VIMCF-93 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
CHRYSLER
2011 2014 200
2008 2010 300/300C
2008 - 2010 Aspen
2007 2011 Sebring
2008 2017 Town & Country
DODGE
2007 2015 Avenger
2010 2012 Caliber
2008 2017 Caravan
2009 2014 Challenger
200 2010 Charger 8
2008 2012 Dakota
2008 2013 Durango
2009 2010 Journey
2007 2012 Nitro
2009 2012 Ram
JEEP
2008 2010 Commander
2009 2015 Compass
2008 2013 Grand Cherokee
2008 2015 Liberty
2009 2017 Patriot
2007 2017 Wrangler
VOLKSWAGEN
2009 2013 Routan
Retains funconality of MyGig Navigaon system for passenger access at any me.
Plug & Play Installaon.
- Compable with MyGig Radios.
VIMCF- MODULE 93
VIMCF-93 HARNESS
1 / 2
Rev.022317
1. Remove the factory radio to gain access to the factory connectors.
2. Make the T-Harness connecons behind the factory radio and OEM harness.
3. Set the DIP switch to the desired VIM funcon. See DIP seng below.
4. Test the interface funcons before re-installing the factory radio.
The VIMCF-93 has a feature that enables the user to have either a permanent or a non-permanent
VIM funcon. To set VIM to permanent, set DIP#1 to ON. To set to non-permanent, set DIP#1 to
OFF and connect the GREEN wire to +12V using a toggle switch (not included).
1. ON = Permanent VIM Enabled
2. Not Used
3. Not Used
4. Not Used
5. Set to OFF
6. Set to OFF
2 / 2
Rev.022317


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: VIMCF-93

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VIMCF-93 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten