CRUX VIMHN-96 Bedienungsanleitung


Lies die bedienungsanleitung für CRUX VIMHN-96 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7 Bewertungen. Hast du eine Frage zu CRUX VIMHN-96 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
HONDA
2 - 014 2015 Civic Coupe / Sedan (EX & above)
2014 - 2015 Civic Si Coupe / Sedan / Hybrid / CNG
2015 2016- Fit
2015 - 2016 CR-V (EX & above)
2016 CR-Z
- -Retains functionality of Factory installed Navigation System for passenger access at anytime.
- Allows the use of the HDMI input while in motion.
- . Plug and Play Installation
- C . ompatible with HondaLink® Next Generation radios only
1. Remove the factory radio from the dashboard.
2. Remove the factory connectors from behind the factory radio.
3. Mate the T- Harness connections to the factory connectors and the VIM module. (Make sure all
connectors are properly seated into the interface and into the radio.)
4. Set DIP1 to ON and the rest to OFF.
5. Test the interface before -re install the radio into the dash.
Vehicle A applic tions
Fea rtu es
Par Its ncluded
I a I cnstall tion nstru tions
Note
Rev.01 1816
1


Produktspezifikationen

Marke: CRUX
Kategorie: Nicht kategorisiert
Modell: VIMHN-96

Brauchst du Hilfe?

Wenn Sie Hilfe mit CRUX VIMHN-96 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten