CRUX XAB-AT3 Bedienungsanleitung

Lies die bedienungsanleitung für CRUX XAB-AT3 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 5 Bewertungen. Hast du eine Frage zu CRUX XAB-AT3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

XAB-AT3

XOSE Alpha Bravo- Amp Toyota 3

rd

Gen

for Select 2018-2025 Toyota Vehicles

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Designed for Toyota 28-pin / 10-pin radio connectors

- Class AB high efficiency car audio amplifier

- Easy to install plug & play installation

- Retains factory head unit, speakers and connectors

- Manufactured using premium hi-fi audio grade components

IMPORTANT:

SAFETY GUIDELINES

PROTECTION MECHANISM:

- This product uses the factory harness connectors, however there are multiple connectors that may look

identical and may have the same size and shape. Do not plug into the wrong connector as it may cause

severe damage to the OE radio. See page2.

- Visit the Crux Interfacing Solutions website for the latest compatibility updates before installation.

- Some vehicles require significant disassembly for installation. It is recommended that installation be

performed by a professional car audio installer or an experienced vehicle technician.

- This amplifier is designed for use with a 12V DC negative ground use only.

- When routing cables near metal brackets or sharp edges, secure them with protective electrical tape.

- Avoid installing the main unit or wiring near moving parts such as the steering column, seat tracks, or pedals.

- Do not mount this product in areas exposed to moisture, excessive dust, or dirt.

- Do not attempt to open, disassemble, or modify this unit.

- Ensure your vehicle's battery is in good condition, as a weak battery can lead to reduced power output and

diminished sound quality.

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.092225 1 of 6

PRODUCT FEATURES:

PARTS INCLUDED:

This amplifier is equipped with a built-in protection circuit that activates under the following conditions:

• If the speaker output terminals experience a short circuit.

• If the batter y is connected with reversed polarity.

• If the amplifier reaches an unsafe temperature due to overheating.

Should any of these situations occur, turn off the vehicle’s ignition and investigate the cause of the issue.

If overheating is the problem, allow the amplifier to cool down before resuming use.

Padding Strips x 2

ENA-2T3 Amplifier

Double Sided Tape x 2 Carpet Mounting Tape x 2

ENA-2T3 Harness

Produktspezifikationen