Digitus DS-55500 Bedienungsanleitung


Lies die bedienungsanleitung für Digitus DS-55500 (6 Seiten) kostenlos online; sie gehört zur Kategorie Audio-/Video-Extender. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu Digitus DS-55500 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
4K HDMI Extender, HDBaseT
Manual
DS-55500
Important safety notice
Please read below safety instructions carefully before installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put any stuff into the device.
Do not repair or open this device without professional people's guidance.
Make sure good ventilation openings to avoid product overheating damage.
Shut off power and make sure environment is safe before installation.
Do not plug-in/out the connected cables when it is in using.
Make sure the specification matched if using 3rd party DC adapters.
1. Introduction
This HDBaseT single network cable extender transmits HDMI signal up to
70 meters over cat6 fluently and clearly. It is lossless in signal and supports 3D,
24 bits deep color, 4Kx2K, CEC and HDCP.
2. Features
Apply HDBaseT extend technology
Uncompressed HDMI video signal
Support full HD 1080p@60Hz, 3D, 4Kx2K
Extend 1080p signal over cat6a up to 70 meters
Support bi-directional IR pass back
Support HDCP, CEC, 24 deep color
Support uncompressed LPCM audio and compressed DTS-HD, Dolby True HD
can be powered by network cable. It only needs to input 12V power for either
transmitter or receiver for normal working
3. Package contents
HDMI to HDBaseT TX, sender x 1
HDBaseT to HDMI RX, receiver x 1
DC12V/2A x 1
IR blaster extension cable x 1
IR receiver extension cable x 1
User manual x 1
Mounting bracket x 1
4. Installation Requirements
HDMI source devices:
With HDMI OUTPUT interface, DVD, PS3, STB, PC etc.
Display devices:
With HDMI INPUT port, SDTV, HDTV, projector
Network cables:
UTP/STP Cat5e/Cat6/Cat6A/Cat7 network cables are following the standard of
IEEE-568B.
5. Panel description
5.1. HDMI to HDBaseT TX Sender
HDMI IN: HDMI signal input to connect with HDMI source device.
IR IN: IR signal input to connect with IR receiver extension cable.
IR OUT: IR signal output to connect with IR blaster extension cable.
DC12V: Power input
HDBT OUT: HDBaseT signal output
5.2. HDBaseT to HDMI RX Receiver
DC12V: Power input
HDBT IN: HDBaseT signal input
HDMI OUT: HDMI signal output to connect with HDMI display device.
IR IN: IR signal input to connect with IR receiver extension cable.
IR OUT: IR signal output to connect with IR blaster extension cable.


Produktspezifikationen

Marke: Digitus
Kategorie: Audio-/Video-Extender
Modell: DS-55500
Unterstützte Audioformate: LPCM
Produktfarbe: Schwarz
Material: Metall
Gleichstrom-Anschluss (DC): Ja
Verpackungsbreite: 149 mm
Verpackungstiefe: 199 mm
Paketgewicht: 896 g
Stromverbrauch (Standardbetrieb): 8 W
Power over Ethernet (PoE): Nein
Ursprungsland: China
Typ: AV-Sender & -Empfänger
Betriebsanleitung: Ja
LED-Anzeigen: Ja
Montageset: Ja
HDCP: Ja
Unterstützte Video-Modi: 480i,480p,576i,576p,720p,1080i,1080p,2160p
3D: Ja
Maximale Bildwiederholrate: 60 Hz
Abmessungen (BxTxH): 66.5 x 98.5 x 23 mm
Ausgangsstrom: 2 A
Maximale Auflösung: 4096 x 2160 Pixel
Anzahl der HDMI-Ausgänge: 1
Verpackungsvolumen: 2372.08 cm³
Maximal mögliche Übertragungsstrecke: 40 m
VK Zolltarifcode: 85176200
unterstütze Kabeltypen: Cat5e,Cat6,Cat6a,Cat7
Fernbedienung (IR) output: 1
HDMI-In: 1
Fernbedienung (IR) input: 1
HDBaseT-Port: Ja

Brauchst du Hilfe?

Wenn Sie Hilfe mit Digitus DS-55500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten