Doepfer A-165 Bedienungsanleitung
Doepfer
Nicht kategorisiert
A-165
Lies die bedienungsanleitung für Doepfer A-165 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu Doepfer A-165 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
doepfer System A - 100 Dual Trigger Modifier A-165
1
1. Introduction
Module A-165 (Dual Trigger Modifier) contains two
separate trigger modifiers, to use with logical / digital
levels (Gate, Clock, Trigger). Each half of the module
enables signals generated by the A-100 to communi-
cate with other instruments (such as an external se-
quencer), or is simply used where you want to reverse
a trigger polarity.
Whatever signal is patched into the input is inverted by
the module, and fed out of the Inv. Out (inverted
output) socket.
At the same time, a trigger signal of roughly 50 ms is
generated every time an edge of the trigger pulse is
sensed (negative as well as positive). This trigger
signal is available at the +/- output.
Two LEDs act as indicators showing the level of signal
available at the two outputs.
A-165
TRIG. MODIF.
In
Inv.
Out
In
+/-
Out
In
Inv.
Out
In
+/-
Out
A-165 Dual Trigger Modifier System A - 100 doepfer
2
2. Overview Indicators
1 LED : Status indicator for the inverted trig-
ger signal at output §
2 LED : Status indicator for the trigger pulse
generated, and available at output $
In / Outputs
! In : Input for trigger signal
" ! In : ditto, linked to input
§ Inv. Out : Output for the inverted trigger signal
$ +/- Out : Output for the trigger pulses genera-
ted by the A-165
A-165
In
TRIG. MODIF.
In
Inv.
Out
+/-
Out
In
In
Inv.
Out
+/-
Out
➀
➁
doepfer System A - 100 Dual Trigger Modifier A-165
3
3. Indicators
1 LED
This LED is the status indicator for the inverted
trigger signal at output §.
2 LED
This LED is the status indicator for the trigger
pulses the A-165 generates, available at output $.
4. In / outputs
! In • " In
Sockets ! and " are the interconnected Inputs to the
A-165. This is where the trigger signal to be modified
is patched in.
P In practice, the original and inverted trigger
signal are often both needed at the same
time, so it’s possible to use these two inputs
as a mini-multiple - using one of them to
send the original trigger to another module.
§ Inv. Out
The inverted trigger signal is available at output §
(see Fig. 1).
$ +/- Out
Output $ carries the trigger signals generated by both
the leading and falling edges of the original trigger
signal (pulse length: approx. 50 ms). See Fig. 1.
Fig. 1: How the A-165’s outputs relate to the input.
w
+/-
Out
Inv.
Out
In
Produktspezifikationen
| Marke: | Doepfer |
| Kategorie: | Nicht kategorisiert |
| Modell: | A-165 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Doepfer A-165 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Doepfer
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
19 August 2024
19 August 2024
19 August 2024
19 August 2024
Bedienungsanleitung Nicht kategorisiert
- Nordlux
- Aerial
- Create
- Ecler
- Metra
- Speck
- Desview
- Rommer
- Miggo
- Sure Petcare
- SatKing
- Revic
- Camille Bauer
- Procare
- BOHLT
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025